Australian Liberty Owners Club
Member Profile - ynot87
Re: Member Profile - ynot87
by shav » Wed Jul 03, 2013 8:03 pm
They look awesome. Nice choice. Keen to see them on the car now
Cheers
Shav
MY07 Subaru Liberty GT Premium Sedan | HKS Panel filter | Pierburg 3 port | Whiteline adj sways F&R | Cusco HD mounts | Whiteline HD front sway links | Anycarlink AL-1080B | Ultrex s/s 3" CBE | Ultrex PU lip spoiler | Invidia s/s dump pipe and 100cel cat | KiDo tuned | DBA T2 rotors | Intima SS brake pads | Mishimoto TMIC | Koya ISR7 wheels | 265L Kobe fuel pump | Diamond Works SI Drive dial | Bilsteins
COSMETIC MODS ON THE WAY
My other toys:
2012 Focus Cayo 2.0 road bike
2015 Cervelo S5 VWD road bike
Shav
MY07 Subaru Liberty GT Premium Sedan | HKS Panel filter | Pierburg 3 port | Whiteline adj sways F&R | Cusco HD mounts | Whiteline HD front sway links | Anycarlink AL-1080B | Ultrex s/s 3" CBE | Ultrex PU lip spoiler | Invidia s/s dump pipe and 100cel cat | KiDo tuned | DBA T2 rotors | Intima SS brake pads | Mishimoto TMIC | Koya ISR7 wheels | 265L Kobe fuel pump | Diamond Works SI Drive dial | Bilsteins
COSMETIC MODS ON THE WAY
My other toys:
2012 Focus Cayo 2.0 road bike
2015 Cervelo S5 VWD road bike
-
shav - Posts: 3609
- Joined: Tue Jun 26, 2012 12:01 pm
- Location: Adelaide, Southern Suburbs
- Car: MY07 Subaru Liberty GT Premium
- Real name: Shav
- Profile URL: viewtopic.php?f=10&t=18915&start=480
Re: Member Profile - ynot87
by satogixxer » Wed Jul 03, 2013 8:14 pm
Very nice mate, for some reason I REALLY like the look of those wheels... oh I know why, they look exactly like my Envies!! 
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | HKS LA clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 369kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
[Outback 3R MY04]: Stock as a rock
Profile video here
-
satogixxer - Posts: 786
- Joined: Mon Oct 15, 2012 10:04 pm
- Location: NSW, Western Sydney
- Car: '10 Liberty GT 6MT + '04 Outback 3R
- Real name: Michael
- Profile URL: viewtopic.php?f=10&t=20495
Re: Member Profile - ynot87
by bigBADbenny » Wed Jul 03, 2013 8:27 pm
ynot87 wrote:These arrived from japan today thanks to Jesse Streeter
Genuine BBS RG-R (RG736H) 18x8.5 +35 in Diamond Black.
They weigh 8.3kg each, mmmm forged goodness
Ooooooh! My favorite fitment.
-
bigBADbenny - Posts: 10482
- Joined: Tue Oct 04, 2011 6:36 pm
- Location: Collingwood, Melbourne
- Car: MY07 GT-B 6MT OBP Wagon
- Real name: Ben Richards
- Profile URL: http://tinyurl.com/agvbzop
Re: Member Profile - ynot87
by Boostaddict » Wed Jul 03, 2013 8:46 pm
Velly noice
Did you have to re mortgage your house for them???
Did you have to re mortgage your house for them???
Not a Subaru...... Something MUCH better
NOPE..... That's shit too. Bus anyone??
NOPE..... That's shit too. Bus anyone??
-
Boostaddict - Posts: 2985
- Joined: Sun May 13, 2012 10:52 am
- Location: Sydney
- Car: 07 LGT Tuned By Sti
- Real name: Daniel
- Profile URL: viewtopic.php?f=10&t=22537
Re: Member Profile - ynot87
by jslayz » Wed Jul 03, 2013 9:14 pm
uh oh, scrubaroo!
Hope you are rolling, stretching n pulling your arches.....
Good luck, sure are good looking wheels.
J
Hope you are rolling, stretching n pulling your arches.....
Good luck, sure are good looking wheels.
J
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
-
jslayz - Posts: 2810
- Joined: Tue Mar 09, 2010 11:32 pm
- Location: Perthhhhhh
- Car: 2005 Liberty GT Wagon
- Real name: J
Re: Member Profile - ynot87
by blacktop™ » Wed Jul 03, 2013 9:23 pm
Just saw these on Facebook...very nice!!
-
blacktop™ - Posts: 2163
- Joined: Tue Dec 15, 2009 3:47 pm
- Location: Sydney, Lower North Shore
- Car: MY07 GT spec.B wagon 6MT
- Real name: ryan
Re: Member Profile - ynot87
by bigBADbenny » Wed Jul 03, 2013 9:40 pm
jslayz wrote:uh oh, scrubaroo!
Hope you are rolling, stretching n pulling your arches.....
Good luck, sure are good looking wheels.
J
Unless youre trying to tuck, just rolling up at the rear is required on slighly stretched 225 tyres.
Its worth it for the sexy poke
-
bigBADbenny - Posts: 10482
- Joined: Tue Oct 04, 2011 6:36 pm
- Location: Collingwood, Melbourne
- Car: MY07 GT-B 6MT OBP Wagon
- Real name: Ben Richards
- Profile URL: http://tinyurl.com/agvbzop
Re: Member Profile - ynot87
by ynot87 » Wed Jul 03, 2013 9:44 pm
my guards are slightly rolled atm but might roll them a tad more.
I planned to run my stock 215/45/18 for a bit of stretch, few mm tuck all round, -2 camber all round.
if i have more room with this setup i might change to 225/40/18.
how much camber are you running atm benny?
I planned to run my stock 215/45/18 for a bit of stretch, few mm tuck all round, -2 camber all round.
if i have more room with this setup i might change to 225/40/18.
how much camber are you running atm benny?
-
ynot87 - Posts: 350
- Joined: Fri Oct 14, 2011 6:12 pm
- Location: S.E Melbourne
- Car: MY06 Liberty GT TB STi
- Real name: Tony
- Profile URL: viewtopic.php?f=10&t=16443
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Member Profile - ynot87
by ynot87 » Wed Jul 03, 2013 9:57 pm
guys on naisoc said they dont, said required 5mm spacers and vw crowd said they dont clear bbk.
ill double check tmrw night and trial fit them.
ill double check tmrw night and trial fit them.
cruisn wrote:Sure they dont clear Brembo's?
-
ynot87 - Posts: 350
- Joined: Fri Oct 14, 2011 6:12 pm
- Location: S.E Melbourne
- Car: MY06 Liberty GT TB STi
- Real name: Tony
- Profile URL: viewtopic.php?f=10&t=16443
Re: Member Profile - ynot87
by bigBADbenny » Wed Jul 03, 2013 9:59 pm
My bet is they will clear 
Not much camber at all, maybe next alignment: moar camber = go a bit loar
Not much camber at all, maybe next alignment: moar camber = go a bit loar
-
bigBADbenny - Posts: 10482
- Joined: Tue Oct 04, 2011 6:36 pm
- Location: Collingwood, Melbourne
- Car: MY07 GT-B 6MT OBP Wagon
- Real name: Ben Richards
- Profile URL: http://tinyurl.com/agvbzop
Re: Member Profile - ynot87
by ynot87 » Wed Jul 03, 2013 10:19 pm
I just went to have a check. they do not clear. needs about 5mm to clear.
ill be heading to mark's place on sunday to remove brembos so they will be up for sale soon.
once they are sold, quest for new set of rims begin again!
ill be heading to mark's place on sunday to remove brembos so they will be up for sale soon.
once they are sold, quest for new set of rims begin again!
-
ynot87 - Posts: 350
- Joined: Fri Oct 14, 2011 6:12 pm
- Location: S.E Melbourne
- Car: MY06 Liberty GT TB STi
- Real name: Tony
- Profile URL: viewtopic.php?f=10&t=16443
Re: Member Profile - ynot87
by Boostaddict » Wed Jul 03, 2013 10:37 pm
ynot87 wrote:I just went to have a check. they do not clear. needs about 5mm to clear.
ill be heading to mark's place on sunday to remove brembos so they will be up for sale soon.
once they are sold, quest for new set of rims begin again!
What??? Your gunna pull the brembo's off and then sell the rims??
Why not just leave as is and sell the rims.??
Not a Subaru...... Something MUCH better
NOPE..... That's shit too. Bus anyone??
NOPE..... That's shit too. Bus anyone??
-
Boostaddict - Posts: 2985
- Joined: Sun May 13, 2012 10:52 am
- Location: Sydney
- Car: 07 LGT Tuned By Sti
- Real name: Daniel
- Profile URL: viewtopic.php?f=10&t=22537
Re: Member Profile - ynot87
by ynot87 » Wed Jul 03, 2013 10:47 pm
lol no im gonna sell the brembos and keep the bbs. use the money i sold the brembos to buy another set of wheels and then sell the bbs and then the cycle continues lol.
im willing to let the brembos goes as it wasnt really on my mod list to begin with. only reason y i had them because i struggled to sell my work vs-tx which i had earlier. me and cruisn worked out a deal so i ended up with brembos.
second hand 5x100 in a decent size and offset is a pain in the ass to find as it is and having brembos makes its a nightmare.
im willing to let the brembos goes as it wasnt really on my mod list to begin with. only reason y i had them because i struggled to sell my work vs-tx which i had earlier. me and cruisn worked out a deal so i ended up with brembos.
second hand 5x100 in a decent size and offset is a pain in the ass to find as it is and having brembos makes its a nightmare.
Boostaddict wrote:ynot87 wrote:I just went to have a check. they do not clear. needs about 5mm to clear.
ill be heading to mark's place on sunday to remove brembos so they will be up for sale soon.
once they are sold, quest for new set of rims begin again!
What??? Your gunna pull the brembo's off and then sell the rims??
Why not just leave as is and sell the rims.??
-
ynot87 - Posts: 350
- Joined: Fri Oct 14, 2011 6:12 pm
- Location: S.E Melbourne
- Car: MY06 Liberty GT TB STi
- Real name: Tony
- Profile URL: viewtopic.php?f=10&t=16443
Re: Member Profile - ynot87
by bigBADbenny » Wed Jul 03, 2013 10:54 pm
Just sell the front calipers and score some low profile AP 4 pots ftw 
-
bigBADbenny - Posts: 10482
- Joined: Tue Oct 04, 2011 6:36 pm
- Location: Collingwood, Melbourne
- Car: MY07 GT-B 6MT OBP Wagon
- Real name: Ben Richards
- Profile URL: http://tinyurl.com/agvbzop
Who is online
Users browsing this forum: No registered users and 6 guests