What oil are you using?

[NRV155]

Arent you only supposed to use 98 in these? I have a sticker on my fuel lid that says 98 only. As for oils, i ended up getting mobile 10w40 semi synthetic.

[Newbie GT]

i was recommended by some subaru forums to use DELVAC.

But anyway, i figured the reason why i spun the bearing.

Was due to use of WRONG PERTROL, was using 95 instead of 98. Strang enough :s

From using delvac you think ?

[Kekotic]

i was recommended by some subaru forums to use DELVAC.

But anyway, i figured the reason why i spun the bearing.

Was due to use of WRONG PERTROL, was using 95 instead of 98. Strang enough :s

From using delvac you think ?

Do you have write a note on your hand to remind yourself to breathe so you don't die?

[migoreng]

I use Penrite HPR 5, I'm really happy with it

+1 it seems to be fine. The previous owner used the same oil and castrol edge 5w30 sometimes.

Dipstick oil level has only dropped like 2-3mm below the top dot over the past 3000km.

I've got a B4 with 180,000km

[owen]

i was recommended by some subaru forums to use DELVAC.

But anyway, i figured the reason why i spun the bearing.

Was due to use of WRONG PERTROL, was using 95 instead of 98. Strang enough :s

From using delvac you think ?

LOOOOOOOOL

I couldn't believe my eyes. I had to re-read the post just to make sure there wasn't anything I missed.

Newbie, I sincerely worry about your clients. Or maybe you're not really an accountant and either your dad or brother or friend is and you are actually not legally old enough to have a license.

[BUDDAH]

Well that takes the heat of Kieran

[Newbie GT]

Well that takes the heat of Kieran

[buxtonions]

I have just purchased my liberty and used the diesel flush in the engine then used 10/40 Magnatec oil Always used in the UK for all my cars mainly AUDI only 2 week in dip stick and oil clean as and 300 klm will keep you posted