Australian Liberty Owners Club

Skip to content

un even length extractors

Posts specific to the 2.5 litre NA engine
Post a reply

un even length extractors

Postby LT5PLA » Tue Apr 29, 2008 9:52 am

Hi guys i have ordered some un even length extracters for my 07 2.5 and was wondering if they will give me that boxer rumble?
LT5PLA
 
Posts: 139
Joined: Fri Jan 18, 2008 11:43 am
Location: Breakfast point
Top

Postby tangcla » Tue Apr 29, 2008 10:00 am

Your 2.5 should already have uneven length headers?
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com
Top

Postby sooobi » Tue Apr 29, 2008 10:20 am

all good.. add a sports muffler and yer done.. bub-bub bub-bub..
Last edited by sooobi on Tue Apr 29, 2008 10:20 am, edited 1 time in total.
Gen1, Gen2, Gen3, Gen4.. No mods, honest...
User avatar
sooobi
 
Posts: 558
Joined: Tue Dec 18, 2007 11:45 am
Location: Sunny Queensland
Car: my05mt GT b.spec no neons
Real name: The Stig
Profile URL: http://forum.liberty.asn.au
Top

Postby EJ25 » Tue Apr 29, 2008 10:20 am

tangcla wrote:Your 2.5 should already have uneven length headers?

its a 2.5NA, i read somewhere that they were even ones.

LT5PLA, can you post a sound clip of the before and after?. and maybe some power figures.
EJ25
 
Posts: 1530
Joined: Fri Nov 03, 2006 7:34 am
Location: Sydney
Top

Postby sooobi » Tue Apr 29, 2008 10:25 am

EJ25 wrote:maybe some POWAAAAAA figures.


Corrected.
Gen1, Gen2, Gen3, Gen4.. No mods, honest...
User avatar
sooobi
 
Posts: 558
Joined: Tue Dec 18, 2007 11:45 am
Location: Sunny Queensland
Car: my05mt GT b.spec no neons
Real name: The Stig
Profile URL: http://forum.liberty.asn.au
Top

Postby tangcla » Tue Apr 29, 2008 10:48 am

Well, if going from even to uneven would lose power...
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com
Top

Postby IDOLYZ » Tue Apr 29, 2008 11:23 am

but at least it'll sound like a WRX...
User avatar
IDOLYZ
 
Posts: 307
Joined: Fri Jan 19, 2007 10:33 am
Real name: Ben
Top

Postby sooobi » Tue Apr 29, 2008 11:27 am

IDOLYZ wrote:but at least it'll sound like a WRX...


it'll sound sweet and the .00000000015 megawatts difference is something only clarence would mention..
Gen1, Gen2, Gen3, Gen4.. No mods, honest...
User avatar
sooobi
 
Posts: 558
Joined: Tue Dec 18, 2007 11:45 am
Location: Sunny Queensland
Car: my05mt GT b.spec no neons
Real name: The Stig
Profile URL: http://forum.liberty.asn.au
Top

Postby tangcla » Tue Apr 29, 2008 11:32 am

I don't know what the gain is, but equal length is what manufacturers are making in an attempt to achieve to generate efficiency.
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com
Top

Postby IDOLYZ » Tue Apr 29, 2008 12:35 pm

has been said before, uneven length will lose powaaaa!
User avatar
IDOLYZ
 
Posts: 307
Joined: Fri Jan 19, 2007 10:33 am
Real name: Ben
Top

Postby sooobi » Tue Apr 29, 2008 3:32 pm

IDOLYZ wrote:has been said before, uneven length will lose powaaaa!


but gain so much more cred..
Gen1, Gen2, Gen3, Gen4.. No mods, honest...
User avatar
sooobi
 
Posts: 558
Joined: Tue Dec 18, 2007 11:45 am
Location: Sunny Queensland
Car: my05mt GT b.spec no neons
Real name: The Stig
Profile URL: http://forum.liberty.asn.au
Top

Postby Resonate » Tue Apr 29, 2008 4:19 pm

street cred >> powaaa
User avatar
Resonate
 
Posts: 925
Joined: Fri May 11, 2007 9:36 pm
Location: Brisbane, QLD
Car: MY07 GT-B (Diamond Grey)
Top

Postby overl0ad » Tue Apr 29, 2008 9:07 pm

MY07 2.5i run equal length.

and they are the opposite direction to the pre 07 ones.

so, that being said, the borla headers (and it's copies) don't fit.

http://www.overl0ad.com/legacyfiles/LAB/IMG_1525.jpg

pic is quite big.
tangcla wrote:I didn't have to. I have girly Asian hands :lol:
User avatar
overl0ad
 
Posts: 1091
Joined: Wed May 16, 2007 8:46 pm
Location: Mel-burn!!!
Car: MY07 GTB 6MT *sold*
Real name: Gerald
Top

Postby sinist4 » Wed Apr 30, 2008 12:21 am

exhaust clip would be nice wen u get this installed. :lol:
[Team Diamond Grey]
User avatar
sinist4
 
Posts: 1058
Joined: Sat Nov 04, 2006 5:28 pm
Location: sydney
Top

Postby LT5PLA » Wed Apr 30, 2008 11:14 am

yeah the piping is different,,, but its going to be moded im getting a complete exhaust setup.. so its all good shouldnt be to hard to do..
LT5PLA
 
Posts: 139
Joined: Fri Jan 18, 2008 11:43 am
Location: Breakfast point
Top
Next
Post a reply

Return to 2.5i engine specific

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB® Forum Software © phpBB Group