Member Profile - Brunsy3.0

Show off what mods you've done to your car.

Member Profile - Brunsy3.0

Postby Brunsy3.0 » Mon Mar 04, 2013 11:06 pm

Hey All


Image

Before any mods (about 3 months after i bought it and moved from NSW up to NT)



Bit of background info:
I was on this forum nearly 12months before i bought my MY07 Pearl White Liberty 3.0L Spec. B (wasnt a member just prowled the forum learning a LOT before i took the plunge), am very glad i did (got it 2nd hand 3 years old, good nick)

i always do some type of mods to my car's whether it be as small as a headunit upgrade to headlight globe change.
I had my audio system installed from my VZ Commodore into the new liberty and let me tell you, the company i chose to do this couldnt have been a worse choice, i would have done a better job high on crack, honestly this was in April 2011 and I am still fixing their damage :angry2:

From this costly and ongoing mistake i have learnt the only person you can truly count on to take care of your pride and joy is yourself so i have gotten into the DIY with a GREAT deal of help to this forum's walkthough's making life a LOT easier, aswell as having member's like the PHATMAN and LEO to take our hard earned money oh so easily

A bit of a list of mods i have done/in the process of doing, and of coarse (the misso's nightmare), the "future mod list"

CAR:
2007 Subaru Liberty 3.0L Spec. B 6MT Pearl White Sedan

Interior Lights (all thanks to Leo HKS_180)
Dome Light 24SMD
Map Light x2 12SMD
Courtesy Lights x2 6SMD
Drip/Splash Lights x4 White 30cm LED Strip
Footwell LED's x4 Blue 30cm LED Strip
Front door pocket blue LED Strip
Boot Light x3 White LED Strips Joined
Blue Ignition barrel LED

Exterior Lights (all thanks to Leo HKS_180)
5000K HID Fog Lights
5000K HID Hi-Beams
5000K HID Low-Beams replacement globes
LED Parkers 9SMD
Licence Plate 5SMD
Phillips Silvervision Indicator Globes T20 Wedge Type- Recommended by Leo
(trialed both the HID and LED Reverse Lights through Leo but had issues so removed back to stock {Leo was very helpful in the whole process})

Engine-bay/Performance/Suspension
HKS Panel Filter - Phat GT/Garage88
Battery Cover - Phat GT/Garage88
ABS Cover - Phat GT/Garage88
Optima D34 Yellow Top
Cusco master cylinder brake stopper - Phat GT/Garage88
Remove Intake Resonator - DIY from the forum (thanks Smythie)
JSpeed Front LCA Bushes - rear outer - Phat GT/Garage88
Whiteline Front LCA Bushes - front inner
tune from West-Minist (Edward from Xtreme Racing Tuning) still in progress basically finished

Exhaust
Phat Quad Tip Mufflers - 2nd hand (thanks Paulie3)
Raptor Headers Ceramic Coated
3rd Cat Delete - Toms Mufflers

Exterior
20% tint
Bosch Twin Aero Wiper Blades 24" and 19" - http://www.wiperblades.co.uk
Corazon Colour Match grill - Phat GT/Garage88
Licence plate lift - Thanks for the help form Mark (Cruisn)
Rear badge colourmatched - Thanks for the walkthrough Mark (Cruisn)

Interior
Clear Courtesy Light Lenses - Phat GT/Garage88
Cabin Filter - Phat GT/Garage88
Colour matched interior trim, (silver pieces painted pearl white)
Change the red led instrument lights all to blue 8)


Audio
IVA-W502E Alpine Headunit
AV Panel (doube Din Fascia) - Phat GT
Alpine PDX 1.1000 Monoblock Amplifier
Alpine PDX 4.150 4 Channel Amplifier
PAC Steering Wheel Controls
Alpine HCE-C105 Reverse Camera
3 Bulk Packs of Dynamat
Alpine Integrated Navigation NVE-M300P
Stinger 1 Farad Capacitor SPC111
Front Speakers - Focal KRX2 Splits 6.5"
Rear Speakers - Focal K2 Coaxial 6.5"
Subwoofer - JL Audio 13W7 13.5" (anniversary edition)
(Removed 8" stock Macintosh speaker and cover with 8" grill inside boot)

Wheels and Tyres
Stock Spec B 18" Rims
Good Year Eagle F1 Directional 5 225/45R18


Future Mods
Coilovers possibly MCA Blue Series
slotted dixcel rotors
Dixcel Type M Brake Pads
APP Brake Lines
secondary intake to where resonator was (3" flexible hose)
Front Lip spoiler STI (preferably 2nd hand if anybody's selling up?)
Rear diffuser


and of coarse a few pics to set it off




Image


Image


Image


Image


Image


Last edited by Brunsy3.0 on Fri Apr 03, 2015 10:45 pm, edited 19 times in total.
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0

Postby zch91 » Mon Mar 04, 2013 11:09 pm

Nice car mate. Looking forward to future mods!

Good to see another Territorian around here, we are a rare breed on this forum :P
User avatar
zch91
-stickered-
 
Posts: 2665
Joined: Sat Dec 24, 2011 11:12 am
Location: Darwin, NT
Car: MY04 GT Premium - Silver 5EAT
Real name: Zach
Profile URL: viewtopic.php?f=10&t=15397

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Mon Mar 04, 2013 11:13 pm

Tell me about it, not even an option in the forum for an NT gathering haha

itd be a few and far between turn out i would say haha
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Thu Mar 07, 2013 11:00 pm

Image

FOOTWELLS



Image

HIDS
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0

Postby zch91 » Thu Mar 07, 2013 11:49 pm

Nice :) I'm trying to think of plate ideas at the moment! Any ideas? :P
User avatar
zch91
-stickered-
 
Posts: 2665
Joined: Sat Dec 24, 2011 11:12 am
Location: Darwin, NT
Car: MY04 GT Premium - Silver 5EAT
Real name: Zach
Profile URL: viewtopic.php?f=10&t=15397

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Fri Mar 08, 2013 7:51 pm

I thought zch91 was a custom plate of yours? what are you trying to relate it to?

thats one of the few perks of the top end, cheap custom plates
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0

Postby zch91 » Fri Mar 08, 2013 8:08 pm

Brunsy3.0 wrote:I thought zch91 was a custom plate of yours? what are you trying to relate it to?

thats one of the few perks of the top end, cheap custom plates


Yeah well I moved from QLD recently, so that was my plate there. I actually ordered some plates today. I got 'ZG' - my initials.
User avatar
zch91
-stickered-
 
Posts: 2665
Joined: Sat Dec 24, 2011 11:12 am
Location: Darwin, NT
Car: MY04 GT Premium - Silver 5EAT
Real name: Zach
Profile URL: viewtopic.php?f=10&t=15397

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Tue Mar 12, 2013 9:48 pm

Car goes in for spray painting tomorrow, will be good to finally stop getting flakes of paint in my wash mit

new bar arrives in the morning, fix up the bonnet stone chips and a few other little bits and pieces and i should be laughing

also before the rear bumper had a little touch up i decided to remove it to add some weight to it to stop it flexing and rattling so much (see below)

Image

stressed bumper

Image

stone chip

Image

removed rear bumper

Image

bumper off

Image

bumper with some added weight


i cant wait to get it back looking fresh
Last edited by Brunsy3.0 on Wed May 15, 2013 6:11 pm, edited 1 time in total.
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Fri Mar 22, 2013 9:14 pm

Car is back on Monday (25-03-13) resprayed bonnet/rear bumper/new front bumper/some other bits and pieces

am very excited, the spray painter is quite pedantic (which is a good thing). He showed me the car on wednesday and said i could pick it up late thursday, i then saw him on thursday only that the bonnet wasnt 100% u to his standard (i honestly could not see what the hell he was trying to show me was wrong with it but he wasnt happy so i let him continue on). i then spoke to him today (friday) and he said there were a few broken parts inside the engine bay that he had fixed up (no extra charge) that looked liek they had been bodgied up in the past, aswell as reminding me i had a cracked foglight, he said he had ordered one in for a customer last year but they never showed up so he sold it to me for $100 brand new still in packaging (i am hoping this is the exact part probably good i haven't paid him yet haha)

so all in all it will be ready on monday and i get to stop driving the work truck around everywhere (mitsubishi 2.0l canter) too much power for me

i will post up pics when finished (i know most of it is just fixing it all up but i am way too excited to get the car back after a week)
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Member Profile - Brunsy3.0

Postby HoFF » Sat Mar 23, 2013 6:57 am

Sounds like you found a winner with your spray painter.

I'm still not quite sure what the dynamat in the rear bumper is achieving tho??
User avatar
HoFF
-stickered-
 
Posts: 1447
Joined: Sun Sep 05, 2010 11:39 am
Location: Southern Highlands NSW
Car: MY06 3RB Liberty Wagon 6MT MY09 Foz
Real name: Tom
Profile URL: viewtopic.php?f=10&t=13577&start=255

Re: Member Profile - Brunsy3.0

Postby bigBADbenny » Sat Mar 23, 2013 7:24 am

Sensationally comprehensive mods so far! :mrgreen:
User avatar
bigBADbenny
 
Posts: 10420
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Sat Mar 23, 2013 4:19 pm

the sub was flexing the rear bumper so i thought to add a bit of weight to the bumper to help reduce it resonating

ill post up some pics when i get the car back of the sub in the boot and some interior shots once i fix up some of the wiring behind the headunit and fit it all back together
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Member Profile - Brunsy3.0

Postby HoFF » Sat Mar 23, 2013 5:11 pm

Ah ok that makes sense now.
User avatar
HoFF
-stickered-
 
Posts: 1447
Joined: Sun Sep 05, 2010 11:39 am
Location: Southern Highlands NSW
Car: MY06 3RB Liberty Wagon 6MT MY09 Foz
Real name: Tom
Profile URL: viewtopic.php?f=10&t=13577&start=255

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Sat Mar 23, 2013 7:19 pm

i also think i went a bit overboard with the stuff, but most of the car is sound proofed anyhow so i dont have much use for any leftover, perhaps behind the panel the licence plate bolts to, i have a few pieces left i think ill take that off and see if i can reduce the plate flex, im getting a slight rattle after i raised the rear number plate
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0

Postby hks180 » Mon Mar 25, 2013 9:03 pm

Nice work Daniel !!
[TEAM FUNERAL]
HID & LED >> CLICK HERE
User avatar
hks180
 
Posts: 2281
Joined: Mon Oct 09, 2006 7:00 am
Location: Sydney

Next

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 11 guests

cron