Anyone run 19' x 8.5" Wheels on a Gen4

[Famma]

Hi all, has anyone run 19' x 8.5" wheels on a gen4 if so what offset?
Any rubbing or problems? Thanks.

[blacktop™]

I believe tangcla had 19x8.5's. they were a +50 offset though

[wilso_8948]

I run +44 offset. Small amount of guard work needed. Mines lowered with coilovers about 2 inches too. Was surprised with how little scrubbing there was

[JDGT05]

I did on my lib, had coilovers and guards rolled, had issues without having the guards rolled but after it was easy

[04GTLIB]

I ran 20" x 8.5" with a +45 offset and only had to roll the guards.

[Boostaddict]

Im going to be running this in the near future.!!! So i will see and get some pics when done

[Famma]

So I did some reasearch and my Sti Enkei's are 18x7.5 +55......... So I figure that if I go up to an 8.5 and keep a +50 - +55 offset I should be ok.......... The wheels I'm looking at are Concave but correct me if I'm wrong, I don't think that matters, because as long as you get the correct offset the relationship from hub to lips should only change with rim width. At least I think that's how it works.... lol

[Famma]

Im going to be running this in the near future.!!! So i will see and get some pics when done

That will be great.....Let me know what offset you end up with. Thanks

[tangcla]

I believe tangcla had 19x8.5's. they were a +50 offset though

Yep they were 19x8.5 +50.
No rubbing, I did have my guards rolled as precaution though.
Lowered with KW Variant-2 coilovers.

[Famma]

I believe tangcla had 19x8.5's. they were a +50 offset though

Yep they were 19x8.5 +50.
No rubbing, I did have my guards rolled as precaution though.
Lowered with KW Variant-2 coilovers.

That looks crazy...... Thanks for the pics