Member Profile - AB501UT!0N

[Jack_Keaka]

Looks great Chris!
I reckon one more layer of yellow, that's what I had to do.
Are you getting led Parker's?

[AB501UT!0N]

Those wheels!! I hope the Victorian prison system does a better job on the 'silver' than their NSW counterparts, mine still look white

Nasty dent ..

Hi Sean and why thank u, they sure are pretty and I hope so two and can u post up a pic of your plates so I can see the colour?

Looks great Chris!
I reckon one more layer of yellow, that's what I had to do.
Are you getting led Parker's?

Thanks Jack and I have some more yellow on the way so this time I am going to do them properly and yes I am once I find somewhere were I can get them!

Any links for a friend?

[Jack_Keaka]

Any links for a friend?

your average eBay LED is the best option mate. I'm not sure if the bulb is different in the pre-facelift to mine...
just take one out and get the number on the side and order some $5 off ebay. pay any more than $15 and your waisting your money.

[seanmau5]

Those wheels!! I hope the Victorian prison system does a better job on the 'silver' than their NSW counterparts, mine still look white

Nasty dent ..

Hi Sean and why thank u, they sure are pretty and I hope so two and can u post up a pic of your plates so I can see the colour?

It's a shit picture, but you get the idea. The silver writing on black looks silver, but I don't think that would suit your car. Do you even have that colour combo in Mexico?

[Jack_Keaka]

sean you should swap the colour combo over. silver on black

[seanmau5]

sean you should swap the colour combo over. silver on black

I'm actually swapping to gold on black, stick with the theme I'm going for

[Azzo28]

Any links for a friend?

your average eBay LED is the best option mate. I'm not sure if the bulb is different in the pre-facelift to mine...
just take one out and get the number on the side and order some $5 off ebay. pay any more than $15 and your waisting your money.

Bayonette type fitting. Different to the facelift verson at they have the wedge type parker (correct me if im wrong). When buying your led parkers, be careful and check how many W the globe you're buying is, you only want a 5W led. I bought a set incorrectly (used them as reverse lights instead).

[AB501UT!0N]

Any links for a friend?

your average eBay LED is the best option mate. I'm not sure if the bulb is different in the pre-facelift to mine...
just take one out and get the number on the side and order some $5 off ebay. pay any more than $15 and your waisting your money.

Bayonette type fitting. Different to the facelift verson at they have the wedge type parker (correct me if im wrong). When buying your led parkers, be careful and check how many W the globe you're buying is, you only want a 5W led. I bought a set incorrectly (used them as reverse lights instead).

Thanks Matt and your dead right Bayonette is the fitting I need but trying to find something suitable and cheap is not so easy and thanks again for your wealth of knowledge

I also have my major serviced booked in this wednesday and the rear rotors are going on at the same time, good by 2k

And Matt sorry I did not come to GSS meet I thought it was on last week! What an idiot am I!

[Jack_Keaka]

2K!!?? Does that include the price of the rotors?
I had a major service done back when I had money (ahh the good ol days) and it cost me $800. That included new timing belt, new front pads and 'the usual'. Actually as I type this I realise there wasn't much wrong with my car...

[Azzo28]

Timing belt can be expensive. Are you going water pump while you're at it?

As for parkers, I bought these. http://www.ebay.com.au/itm/FKNew-Auto-2 ... 416ba41da1

But I did have issues fitting them as they're too big to fit in the hole. (Minds out of the gutter)

[Jack_Keaka]

You could give Leo (HKS180) a PM to see what he can do for you

[Azzo28]

You could give Leo (HKS180) a PM to see what he can do for you

I think I may have asked him when I got my HID's. Worth a shot though.

[AB501UT!0N]

2K!!?? Does that include the price of the rotors?
I had a major service done back when I had money (ahh the good ol days) and it cost me $800. That included new timing belt, new front pads and 'the usual'. Actually as I type this I realise there wasn't much wrong with my car...

It does thank goodness and it shouldnt be that much but give or take 100 dollars! And there is nothing wrong with mine but it seems I am getting new everything lol

Timing belt can be expensive. Are you going water pump while you're at it?

As for parkers, I bought these. http://www.ebay.com.au/itm/FKNew-Auto-2 ... 416ba41da1

But I did have issues fitting them as they're too big to fit in the hole. (Minds out of the gutter)

And it sure is expensive and I am not going to get the waterpump done this time round cause I cant afford much more atm lol and Thanks for the link Matt and what did u have to do to get it to fit? And nice joke

Also thank u both for the idea about hks180 and I might pm soon

Still waiting on my plates! Please Come this week Please!

[Jack_Keaka]

Still waiting on my plates! Please Come this week Please!

lets hope you don't have to wait as long as i did keep checking it incase

[AB501UT!0N]

Still waiting on my plates! Please Come this week Please!

lets hope you don't have to wait as long as i did keep checking it incase

I hope not and how do I check it?