Australian Liberty Owners Club

Skip to content

Jaydece's Major Development Project

Show off what mods you've done to your car.
Post a reply

Re: Jaydece's Mini Development Project

Postby jaydece » Thu May 03, 2012 9:23 am

dr20t wrote:Justin good luck man

I know it's a pain and you don't need the extra headaches (some workshops should be closed down), bit hopefully it will all come good

What exactly is it in the cam setup that's causing this? Is it the cam timing and dialing in that is out? Should be easy to pickup with a degree wheel and the plastic timing covers off.

Either way man I hope it all wrks out for you and you make some solid numbers and have an awesome car to drive!

Mick


we went to take the cover off yesterday but all the bolts just kept spinning.....cause they were overtightened when it was put back on..... :evil: :evil: :evil:
~JUSZTN~

** Our Turbo Lag Gives Those v8's A Chance **

History - MY07 Liberty TBSTI 6SPD Sedan
265kw atw on P100
290kw atw on E85 (fuel pump limited)

Past - MY16 Audi S3 Sedan
249kw atw on P98 (APR stage 1)

Present - MY18 Audi RS3 Sedan (His)
384kw atw on E85 (APR stage 2)

Present - MY17 VW Tiguan 162 R line (Hers)
User avatar
jaydece
 
Posts: 1632
Joined: Fri Apr 23, 2010 11:21 pm
Location: VIC, Berwick 3806
Car: MY18 Audi RS3 Sedan 7 SPD DSG
Real name: Justin
Profile URL: viewtopic.php?f=10&t=11864
Top

Re: Jaydece's Mini Development Project

Postby <GB> » Fri May 04, 2012 1:51 pm

is there good news?
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660
Top

Re: Jaydece's Mini Development Project

Postby Kekotic » Fri May 04, 2012 2:08 pm

<GB> wrote:is there good news?

His engine was built by HP Fail, so I doubt it lol.
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066
Top

Re: Jaydece's Mini Development Project

Postby <GB> » Fri May 04, 2012 2:15 pm

chaotic2050 wrote:
<GB> wrote:is there good news?

His engine was built by HP Fail, so I doubt it lol.

thats not nice, they have been known to build some tough stuff in the past..
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660
Top

Re: Jaydece's Mini Development Project

Postby jaydece » Sat May 05, 2012 9:31 pm

MAJOR UPDATE:
Attachments
Edge Dyno Day Torque.jpg
Edge Dyno Day Torque.jpg (48.17 KiB) Viewed 3989 times
Edge Dyno Day PSI Kw.jpg
Edge Dyno Day PSI Kw.jpg (46.88 KiB) Viewed 3989 times
Springy AFR.jpg
Springy AFR.jpg (57.58 KiB) Viewed 3989 times
Springy Kw.jpg
Springy Kw.jpg (57.29 KiB) Viewed 3989 times
Springy Flywheel.jpg
Springy Flywheel.jpg (58.66 KiB) Viewed 3989 times
~JUSZTN~

** Our Turbo Lag Gives Those v8's A Chance **

History - MY07 Liberty TBSTI 6SPD Sedan
265kw atw on P100
290kw atw on E85 (fuel pump limited)

Past - MY16 Audi S3 Sedan
249kw atw on P98 (APR stage 1)

Present - MY18 Audi RS3 Sedan (His)
384kw atw on E85 (APR stage 2)

Present - MY17 VW Tiguan 162 R line (Hers)
User avatar
jaydece
 
Posts: 1632
Joined: Fri Apr 23, 2010 11:21 pm
Location: VIC, Berwick 3806
Car: MY18 Audi RS3 Sedan 7 SPD DSG
Real name: Justin
Profile URL: viewtopic.php?f=10&t=11864
Top

Re: Jaydece's Mini Development Project

Postby jaydece » Sat May 05, 2012 9:39 pm

MANY MANY MANY MANY MANY MANY MANY THANK YOU'S TO:

DANNY - Farken Gun Tune! You Da Man!

PETE - Fixing My Fark up's / Putting My Car Back Together 110%

DANIEL - Farken Helping With Tha Gun Tune! Help Fixing My Fark up's

LEAH - Xcellent Reception, Communication & Lunch

AND ALL STAFF AT SPRINGY PERFORMANCE MOTORS! :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:
~JUSZTN~

** Our Turbo Lag Gives Those v8's A Chance **

History - MY07 Liberty TBSTI 6SPD Sedan
265kw atw on P100
290kw atw on E85 (fuel pump limited)

Past - MY16 Audi S3 Sedan
249kw atw on P98 (APR stage 1)

Present - MY18 Audi RS3 Sedan (His)
384kw atw on E85 (APR stage 2)

Present - MY17 VW Tiguan 162 R line (Hers)
User avatar
jaydece
 
Posts: 1632
Joined: Fri Apr 23, 2010 11:21 pm
Location: VIC, Berwick 3806
Car: MY18 Audi RS3 Sedan 7 SPD DSG
Real name: Justin
Profile URL: viewtopic.php?f=10&t=11864
Top

Re: Jaydece's Mini Development Project

Postby bigBADbenny » Sat May 05, 2012 9:41 pm

Far out! :shock:
User avatar
bigBADbenny
 
Posts: 10465
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop
Top

Re: Jaydece's Mini Development Project

Postby dr20t » Sat May 05, 2012 9:56 pm

Justin mate well done on a fantastic result!

Farken 1100newtons!! Awesome must pull like a train

Good to see it all went well in the end man now go out and enjoy it ! :D

How does it drive?
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137
Top

Re: Jaydece's Mini Development Project

Postby Kekotic » Sat May 05, 2012 9:57 pm

<GB> wrote:
chaotic2050 wrote:
<GB> wrote:is there good news?

His engine was built by HP Fail, so I doubt it lol.

thats not nice, they have been known to build some tough stuff in the past..

I already knew Justins result I was just trying to make it more of a surprise by putting some doubt in the thread.


Good stuff Justin really happy for you mate. guess there wasnt really much of a battle of the tuners today like people were hoping for. Ended up being a massacre
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066
Top

Re: Jaydece's Mini Development Project

Postby jacks-GTB » Sat May 05, 2012 9:58 pm

Justin well done :clapping: :good:

thats some really good figures...

howz it drive?
User avatar
jacks-GTB
 
Posts: 1332
Joined: Wed Mar 30, 2011 8:06 pm
Location: Central Coast NSW
Car: 2007 Subaru Liberty GT Spec B
Profile URL: viewtopic.php?f=10&t=16629
Top

Re: Jaydece's Mini Development Project

Postby <GB> » Sat May 05, 2012 10:06 pm

chaotic2050 wrote:
<GB> wrote:
chaotic2050 wrote:His engine was built by HP Fail, so I doubt it lol.

thats not nice, they have been known to build some tough stuff in the past..

I already knew Justins result I was just trying to make it more of a surprise by putting some doubt in the thread.


Good stuff Justin really happy for you mate. guess there wasnt really much of a battle of the tuners today like people were hoping for. Ended up being a massacre

I wouldn't say it was a battle, but it may swing people, ive gotta find my issue which could be pump fuel supply problem, I think Bruce is changing ASAP lol


Good work Justin I told u it had heaps more in it, congratulations for today!!
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660
Top

Re: Jaydece's Mini Development Project

Postby brainy » Sat May 05, 2012 10:07 pm

dr20t wrote:Justin mate well done on a fantastic result!

Farken 1100newtons!! Awesome must pull like a train

Good to see it all went well in the end man now go out and enjoy it ! :D

How does it drive?


How does it drive??? Hold on real tight or else you'll fall into the back seat. ;)
MY08 Liberty GT Spec B
User avatar
brainy
 
Posts: 520
Joined: Wed Sep 23, 2009 9:45 am
Location: Melbourne
Car: MY08 Liberty GT Spec B
Top

Re: Jaydece's Mini Development Project

Postby <GB> » Sat May 05, 2012 10:12 pm

brainy wrote:
dr20t wrote:Justin mate well done on a fantastic result!

Farken 1100newtons!! Awesome must pull like a train

Good to see it all went well in the end man now go out and enjoy it ! :D

How does it drive?


How does it drive??? Hold on real tight or else you'll fall into the back seat. ;)

Well yeah it would when the clutch works lol
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660
Top

Re: Jaydece's Mini Development Project

Postby 3rspecb » Sun May 06, 2012 8:30 am

Well done Justin awesome result. Can't wait for you to take me for a spin :wink:
MY06 3rspecb manual sedan, Urban Grey- Shockworks Coilovers '- Gone

MY17 SSv Redline, manual sedan, White.
3rspecb
 
Posts: 1342
Joined: Mon Oct 09, 2006 10:59 pm
Location: Melbourne
Car: MY17 SSv Redline
Real name: G
Top

Re: Jaydece's Mini Development Project

Postby bass_straitener » Sun May 06, 2012 9:45 am

Congratulations Justin. Awesome result.. :bb:
"If A is a success in life, then A equals x plus y plus z. Work is x; y is play; and z is keeping your mouth shut."
User avatar
bass_straitener
-stickered-
 
Posts: 2247
Joined: Mon Jul 25, 2011 8:31 pm
Location: Melbourne, Victoria
Car: MY12 C63
Real name: Bruce
Profile URL: viewtopic.php?f=10&t=14781
Top
PreviousNext
Post a reply

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 3 guests

Powered by phpBB® Forum Software © phpBB Group