The product will go everywhere globally - where ever you are we can get them to you
Just as the SC kits already do
Kodax - you should fill in your "location" in the user control panel so we can see where you are located on this planet
Australian Liberty Owners Club
Extractor Manufacturing
Re: Extractor Manufacturing
by Tradewind » Sat Mar 03, 2012 6:41 am
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
- Tradewind
- Posts: 2040
- Joined: Tue Mar 15, 2011 3:00 pm
- Location: Gordonvale Qld
- Car: Grey MY15 6GEN 3.6R - Raptor MAF
- Real name: Tim
Re: Extractor Manufacturing
by Kodax » Sat Mar 03, 2012 11:42 am
Done. 
I am located in Seattle, WA. There are a couple of people lurking around http://www.legacygt.com that has a 3.0R and i am pretty sure they will be interested in this mod. Maybe you can hop over there to see if you could generate some international interest.
I am located in Seattle, WA. There are a couple of people lurking around http://www.legacygt.com that has a 3.0R and i am pretty sure they will be interested in this mod. Maybe you can hop over there to see if you could generate some international interest.
- Kodax
- Posts: 10
- Joined: Sat Mar 03, 2012 3:38 am
- Location: Seattle, WA, USA
- Car: Subaru Legacy 3.0R
Re: Extractor Manufacturing
by Tradewind » Sat Mar 03, 2012 11:55 am
Been to Seattle in 1991!
Just spread the word for me in a few weeks time if you like, they can link across here if they want to have a look but dont rev em up on the idea just yet ok. We need a couple more weeks as I probably will only make limited progress on them this coming week
Just spread the word for me in a few weeks time if you like, they can link across here if they want to have a look but dont rev em up on the idea just yet ok. We need a couple more weeks as I probably will only make limited progress on them this coming week
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
- Tradewind
- Posts: 2040
- Joined: Tue Mar 15, 2011 3:00 pm
- Location: Gordonvale Qld
- Car: Grey MY15 6GEN 3.6R - Raptor MAF
- Real name: Tim
Re: Extractor Manufacturing
by Tradewind » Wed Mar 07, 2012 7:32 am
I have the next set of extractors ordered and I may have them tomorrow
These look more or less identical to the item shown back a few posts ago in these thread.
These will be the "good thing"
These look more or less identical to the item shown back a few posts ago in these thread.
These will be the "good thing"
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
- Tradewind
- Posts: 2040
- Joined: Tue Mar 15, 2011 3:00 pm
- Location: Gordonvale Qld
- Car: Grey MY15 6GEN 3.6R - Raptor MAF
- Real name: Tim
Re: Extractor Manufacturing
by Tradewind » Thu Mar 08, 2012 6:26 am
Hoping we have a new set of pipes today or tomorrow at the latest
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
- Tradewind
- Posts: 2040
- Joined: Tue Mar 15, 2011 3:00 pm
- Location: Gordonvale Qld
- Car: Grey MY15 6GEN 3.6R - Raptor MAF
- Real name: Tim
Re: Extractor Manufacturing
by Tradewind » Sat Mar 10, 2012 2:28 pm
I have made a cutaway of the standard manifold, you will see where the gains are going to be made
The standard header must cost Subaru a fortune to make, very complicated item for no real purpose apart from quietness. The 31mm ID pipes where it bolts to the engine reduce in size significantly if you calculate the square area of the little D or square shaped outlets compared
No wonder G experienced an improvement soonest he bolted on the K2 gear!!!
The standard header must cost Subaru a fortune to make, very complicated item for no real purpose apart from quietness. The 31mm ID pipes where it bolts to the engine reduce in size significantly if you calculate the square area of the little D or square shaped outlets compared
No wonder G experienced an improvement soonest he bolted on the K2 gear!!!
- Attachments
-
- The better option H6 Extractors
- EZ36R Headers I.JPG (79.38 KiB) Viewed 3688 times
-
- Subaru H6 3.0 factory exhaust manifold assy cutaway
- IMG_8567 (resized).jpg (76.64 KiB) Viewed 3688 times
-
- Subaru H6 3.0 factory exhaust manifold assy cutaway
- IMG_8565 (resized).jpg (73.62 KiB) Viewed 3688 times
-
- Subaru H6 3.0 factory exhaust manifold assy cutaway
- IMG_8564 (resized).jpg (66.47 KiB) Viewed 3688 times
-
- Subaru H6 3.0 factory exhaust manifold assy cutaway
- IMG_8562 (resized).jpg (85.27 KiB) Viewed 3688 times
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
- Tradewind
- Posts: 2040
- Joined: Tue Mar 15, 2011 3:00 pm
- Location: Gordonvale Qld
- Car: Grey MY15 6GEN 3.6R - Raptor MAF
- Real name: Tim
Re: Extractor Manufacturing
by Tradewind » Sat Mar 10, 2012 3:09 pm
There we go, a bunch of pics, the first pic has to be the better thing, the factory thing is a ................. 
Bit of an effort trying to get a decent flow through these with a supercharger up front, extractors are a must have item for boosted cars and the NA will run better too
Bit of an effort trying to get a decent flow through these with a supercharger up front, extractors are a must have item for boosted cars and the NA will run better too
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
- Tradewind
- Posts: 2040
- Joined: Tue Mar 15, 2011 3:00 pm
- Location: Gordonvale Qld
- Car: Grey MY15 6GEN 3.6R - Raptor MAF
- Real name: Tim
Re: Extractor Manufacturing
by SH30RB » Sat Mar 10, 2012 3:53 pm
WOW! now im definitely looking forward to them tim!
TEAM FUNERAL HEARSE!
Only slightly modified, I swear!
Only slightly modified, I swear!
-
SH30RB - -stickered-
- Posts: 4024
- Joined: Sun Aug 07, 2011 8:32 pm
- Location: Sydney
- Car: 05 Liberty 3.0R-B wagon
- Real name: Simon
- Profile URL: viewtopic.php?f=10&t=14766
Re: Extractor Manufacturing
by Doyab » Sat Mar 10, 2012 5:51 pm
SH30RB wrote:WOW! now im definitely looking forward to them tim!
Agreed
- Doyab
- Posts: 383
- Joined: Fri Oct 22, 2010 5:19 pm
- Location: Sunbury Victoria
- Car: 2005 3.0RB
- Real name: Jake
Re: Extractor Manufacturing
by Pundit » Sat Mar 10, 2012 6:04 pm
Doyab wrote:SH30RB wrote:WOW! now im definitely looking forward to them tim!
Agreed
+1
-
Pundit - -stickered-
- Posts: 58
- Joined: Mon May 23, 2011 7:11 pm
- Location: Bend Of Islands, Victoria
- Car: MY05 3.0R 5AT, Honda CBR125R
- Real name: Keith
Re: Extractor Manufacturing
by Lib 3.0LR » Sat Mar 10, 2012 8:44 pm
Pundit wrote:Doyab wrote:SH30RB wrote:WOW! now im definitely looking forward to them tim!
Agreed
+1
+1 +1
Silver wagon MY06 3.0LR/18' STI Enkei rims/STI front lip/STI pedels/STI mufflers/STI flexible bar/HKS panel air filter/Clarion CeNET iPod interface EA1251 /HID lights-fogs 6000k/Led parkers/Bilstien- Eibach springs / Corazon Grill /Brembo's-Dixel pads/goodride-brakelines./Cusco: BRAKE CYLINDER STOPPER /.Valenti Japan LED Tail Light/In Car PC,JDM Front Bar /KiDo Tune more TBA ?[size=85]
-
Lib 3.0LR - Posts: 1188
- Joined: Thu Aug 13, 2009 9:08 pm
- Location: Sydney
- Car: MY06 LIBERTY 3.0LR WAGON.
- Real name: George
Re: Extractor Manufacturing
by SH30RB » Sat Mar 10, 2012 8:50 pm
looks like there are a few of us NA boys waiting?
TEAM FUNERAL HEARSE!
Only slightly modified, I swear!
Only slightly modified, I swear!
-
SH30RB - -stickered-
- Posts: 4024
- Joined: Sun Aug 07, 2011 8:32 pm
- Location: Sydney
- Car: 05 Liberty 3.0R-B wagon
- Real name: Simon
- Profile URL: viewtopic.php?f=10&t=14766
Re: Extractor Manufacturing
by Doyab » Sat Mar 10, 2012 8:55 pm
Providing price is right u will find about 10 buyers immediately. The question is always been ask since this forums existence.
- Doyab
- Posts: 383
- Joined: Fri Oct 22, 2010 5:19 pm
- Location: Sunbury Victoria
- Car: 2005 3.0RB
- Real name: Jake
Re: Extractor Manufacturing
by SH30RB » Sat Mar 10, 2012 9:14 pm
yeah, true. altho he did quote $660 and then some for delivery. id say most of us would be from around the melbourne area too
TEAM FUNERAL HEARSE!
Only slightly modified, I swear!
Only slightly modified, I swear!
-
SH30RB - -stickered-
- Posts: 4024
- Joined: Sun Aug 07, 2011 8:32 pm
- Location: Sydney
- Car: 05 Liberty 3.0R-B wagon
- Real name: Simon
- Profile URL: viewtopic.php?f=10&t=14766
Return to 3.0R & 3.6R engine specific
Who is online
Users browsing this forum: No registered users and 4 guests