Wtb: driver headlight gen 4

by **Mat04** » Sun Feb 19, 2012 12:09 pm

As the title says I need a d/s headlight for a gen 4 as mine has broken clips and the globes beam is pointing at the gutter.

by **zch91** » Sun Feb 19, 2012 12:17 pm

Mine has broken clips too.. It sucks. I managed to ziptie them in place tho. There are adjustment screws for the beam level etc too

by **Smithyy** » Sun Feb 19, 2012 1:04 pm

I need the passenger side if you find a seller ..

by **hamish_023** » Sun Feb 19, 2012 2:03 pm

Smithyy wrote:I need the passenger side if you find a seller ..

Yours will be a different shape to the preface lift though

by **Mat04** » Sun Feb 19, 2012 3:11 pm

I got a 03 model gen4

by **JKeep2.5i** » Sun Feb 19, 2012 4:03 pm

Mat04 wrote:I got a 03 model gen4

MY04 model build was started in late 03

mines the same buillt in decemeber 2003

by **zch91** » Sun Feb 19, 2012 4:19 pm

JKeep2.5i wrote:
Mat04 wrote:I got a 03 model gen4

MY04 model build was started in late 03 mines the same buillt in decemeber 2003

Yeh mines 11/03

by **Smithyy** » Sun Feb 19, 2012 6:40 pm

hamish_023 wrote:
Smithyy wrote:I need the passenger side if you find a seller ..

Yours will be a different shape to the preface lift though

Was on tapatalk when i posted, couldn't see Mats car details until now :/

by **Mat04** » Sun Feb 19, 2012 8:35 pm

So does anyone want to go halves if I find a pair?

by **RAN94A** » Tue Feb 21, 2012 11:52 am

i'll go halvesies depending on price and if you're getting the chrome interior one... (as opposed to the blacked out GT ones)

by **Nipple06** » Tue Mar 06, 2012 6:35 pm

Brought one for this problem the other day passengers side $70 costed was a bit scratched and clips broken but all there i needed. Good luck guys if i find one or you find one I'm looking for the cables for a light upgrade.

by **Nipple06** » Fri Mar 09, 2012 5:01 pm

Guys I may have found you a solution i found a wrecker with 5+ liberty's that's only the gen 4 ones has gen 3's etc
They are called JAP wreck
Number is (02) 9725 2722 761 The Horsley Drive, Smithfield NSW 2164
Hope helps you guys

by **nickk__is** » Fri Mar 09, 2012 5:43 pm

Hey guys, had the same problem not too long ago. Got a quote from Subaru and its something like $800 per headlight just so you can take out the headlights part and replace the clip! Ridiculous ... Anyway, I went onto eBay an ordered a usdm set of headlights made by an aftermarket supplier for $400 for the left and right side headlight and then took out the projector part and installed that into my stock headlights I already have. If your willing to do that, it's certainly a cheaper option than going through Subaru australia.

Good luck!

by **mihai** » Fri Mar 09, 2012 7:58 pm

nickk__is wrote:Hey guys, had the same problem not too long ago. Got a quote from Subaru and its something like $800 per headlight just so you can take out the headlights part and replace the clip! Ridiculous ... Anyway, I went onto eBay an ordered a usdm set of headlights made by an aftermarket supplier for $400 for the left and right side headlight and then took out the projector part and installed that into my stock headlights I already have. If your willing to do that, it's certainly a cheaper option than going through Subaru australia.

Good luck!

Isn't your beam all wrong now coz of the USDM projectors? The cutoff for their cars would be on the opposite side to our cars

by **nickk__is** » Fri Mar 09, 2012 8:34 pm

Just out them in on the opposite side to how you get them. Your not using the whole headlights, just the single projector part so it works out exactly the same