Hey everyone!
Please can someone help me out and find out somewhere cheap where I can get everything to lower my 94 Gen 1 Liberty Wagon?
When I went to Pedders they were trying to sell me springs, struts and even smaller bump stops! It was going to cost a small fortune!
If anyone has (or knows someone with) a set of lowered Gen 1 Liberty wagon springs please contact me ASAP!
You can email me ricksta@email.com or post it on here!
Cheers!
Rick!
Australian Liberty Owners Club
Everything to lower a 1994 Gen 1 Liberty Wagon!
6 posts
• Page 1 of 1
Everything to lower a 1994 Gen 1 Liberty Wagon!
by ricksta » Fri Mar 02, 2012 4:43 pm
- ricksta
- Posts: 2
- Joined: Fri Mar 02, 2012 4:23 pm
- Car: 1994 Gen 1 Subaru Liberty Wagon
- Real name: Rick
Re: Everything to lower a 1994 Gen 1 Liberty Wagon!
by cruisn » Fri Mar 02, 2012 6:32 pm
King springs, 30mm drop. done.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Everything to lower a 1994 Gen 1 Liberty Wagon!
by ricksta » Sat Mar 03, 2012 10:42 pm
Thanks mate! A little birdy told me that Lovells do low and super low springs as well and they are cheaper??? I haven't had a chance to check it out! Has anyone had anything to do with Lovell springs in Liberty's?
- ricksta
- Posts: 2
- Joined: Fri Mar 02, 2012 4:23 pm
- Car: 1994 Gen 1 Subaru Liberty Wagon
- Real name: Rick
Re: Everything to lower a 1994 Gen 1 Liberty Wagon!
by cruisn » Sun Mar 04, 2012 7:40 am
Lovells are good springs.
IMO Dont go superlow, it'll ruin the ride.
IMO Dont go superlow, it'll ruin the ride.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Everything to lower a 1994 Gen 1 Liberty Wagon!
by t.renshaw34 » Sun Mar 04, 2012 7:43 am
Gc8 red STI struts are a good bolt on strut option if your wanting a better strut.
Project Lib - HKS-Killer B-STI-Ultrex-Stanza-Innovate-Perrin-Dynamat-DAMD-K2 Gear-BC-Kartboy-Whiteline-Cusco-Brembo-ROTA-Pirelli-Goodridge-Project MU-DBA-EBC-Garage 88-AVO-Redline-Carbign Craft-Walbro-ID-Kstech-Turbosmart-X Force-Rallitek
-
t.renshaw34 - Posts: 1630
- Joined: Sat Aug 13, 2011 12:14 pm
- Location: Adelaide, SA
- Car: 2005 Black Lib GT
- Real name: Taylor
- Profile URL: viewtopic.php?f=10&t=13404
Re: Everything to lower a 1994 Gen 1 Liberty Wagon!
by Barlo » Sat Mar 10, 2012 12:30 am
King springs are about $240 on ebay for front and rear, 30mm lowered.
- Barlo
- Posts: 1
- Joined: Fri Mar 09, 2012 8:56 pm
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 11 guests