Member Profile: Kekotic (Updated 12/04/14)

[<GB>]

Got the Perrin turbo inlet pipe installed today. Huge thanks to Justin for doing it!

That pipe is so annoying and not worth 1/10th of the trouble to put it in
But it's on now and working fine, no CEL's after all these mods. Ordering VF52 soon and then getting the tune with the 3 port grimspeed solenoid. Hopefully can book that tune in sometime in early April.

Hurry up and get the turbo on!!!

[Kekotic]

Hurry up and get the turbo on!!!

Shipping is going to take at least 2 weeks! Also plenty of time before the dyno day. I'll be ordering the turbo in 2 weeks time. Now that I'm not buying the LSD off Gambit, that helps me get a tune quicker.

[<GB>]

Hurry up and get the turbo on!!!

Shipping is going to take at least 2 weeks! Also plenty of time before the dyno day. I'll be ordering the turbo in 2 weeks time. Now that I'm not buying the LSD off Gambit, that helps me get a tune quicker.

Why did u want it? Did u have plans on more power/ track days/ dragging?

[Kekotic]

Why did u want it(The LSD)? Did u have plans on more power/ track days/ dragging?

Because Coyote told me to get it, and if he says it's good, then it's good
Unfortunately my Mum broke her wrist this week so had to take a couple of days off work, and I got a flat on Friday (still checking to see if it's a slow leak or maybe Failzone did something wrong) so I'm down about as much as it would have cost for the LSD, so I figured I can do without it for now.

[<GB>]

Why did u want it(The LSD)? Did u have plans on more power/ track days/ dragging?

Because Coyote told me to get it, and if he says it's good, then it's good
Unfortunately my Mum broke her wrist this week so had to take a couple of days off work, and I got a flat on Friday (still checking to see if it's a slow leak or maybe Failzone did something wrong) so I'm down about as much as it would have cost for the LSD, so I figured I can do without it for now.

Probably got a screw in it

[Kekotic]

Probably got a screw in it

Potentially, I'm yet to have a proper look. Will do so tomorrow by taking it off the car.

[<GB>]

So probably not fail zones fault

[Kekotic]

So probably not fail zones fault

Twas merely a joke Brandon!

[dr20t]

Mate I'm sorry about the engine cover I honestly did not know it was cut (I have a 2litre and wrn I sized up the covers they were bang on the same size)

Happy to pay you back your money in full and return postage for you to send it back if that helps

My apologies again mate for the inconvenience.

Also - mods planned look great. I hope it all works out you will love e85 !

Mick

[Kekotic]

Mick don't worry about the cover. <GB> is buying it off me for $50. But feel free to send me the postage money back

[<GB>]

Mate I'm sorry about the engine cover I honestly did not know it was cut (I have a 2litre and wrn I sized up the covers they were bang on the same size)

Happy to pay you back your money in full and return postage for you to send it back if that helps

My apologies again mate for the inconvenience.

Also - mods planned look great. I hope it all works out you will love e85 !

Mick

I'm buying it off him so he better not return it!!! Lol

[Kekotic]

Took wheel off, very small nail in the tyre. I assumed it would be something like that. At least it's repairable due to it being so small and not on the sidewall.
Threw the spare on and will take the tyre to somewhere when I can be bothered, I don't plan on driving the car much anyway so no rush to get it done.

Noticed I'm using a slightly more fuel now with the Perrin inlet pipe....although maybe I'm just being paranoid. I only tested it for about 10km so it's hard to say. Either way, another reason to get the tune sooner rather than later

[<GB>]

Nothing worse than a slight leak from a screw, I repair heaps at work

[Kekotic]

Nothing worse than a slight leak from a screw, I repair heaps at work

Repair mine for free then. So I can save some money on that engine cover postage
P.S not kidding.

[<GB>]

Nothing worse than a slight leak from a screw, I repair heaps at work

Repair mine for free then. So I can save some money on that engine cover postage
P.S not kidding.

I use plugs... If ur ok with them I can, best have that tyre on the back... Next kebab met lol u be surprised how fast they are fixed