Launching??

Posts specific to the 3.0 litre NA H6 engine

Launching??

Postby sutherland91 » Sun Feb 05, 2012 9:50 pm

What would be the recomended rpm to launch off the line at?? and what if any clutch upgrades should be done before trying to launch. I have been looking at an Exedy double clutch, would this be iladvised?
sutherland91
 
Posts: 3
Joined: Sat Dec 24, 2011 12:16 pm
Car: MY 05 liberty 3.0RB

Re: Launching??

Postby iisshhyy » Sun Feb 05, 2012 10:11 pm

iisshhyy
 
Posts: 426
Joined: Wed Mar 16, 2011 10:13 pm

Re: Launching??

Postby bates91 » Sun Feb 05, 2012 11:45 pm

^^ hahahahahhahaha

i personally prefer holding it at 5237 rpm exactly before dropping the clutch.

in all seriousness, anywhere from 3-3.5k rpm works pretty well for me on the odd occasion im giving it all from a stop, but i think its more about how you use the clutch than an exact rpm
User avatar
bates91
-stickered-
 
Posts: 1266
Joined: Wed Sep 22, 2010 11:02 pm
Location: Sydney
Car: BMW 135i
Real name: Edward
Profile URL: viewtopic.php?f=10&t=15799

Re: Launching??

Postby Egg » Mon Feb 06, 2012 12:33 pm

Being 4wd I wouldn't be doing hard launches in the car as it puts alot of stress on the box but thats just me..... When I had my rex I was advised that the golden rule was never to dump it in that type of car.

Each to their own I suppose.
User avatar
Egg
 
Posts: 317
Joined: Thu Jan 24, 2008 4:27 pm
Location: Melb
Car: MY07 Spec B Wagon Pearl white
Real name: Ivan

Re: Launching??

Postby bosc0 » Mon Feb 06, 2012 1:51 pm

6speeds are a lot stronger than 5speeds. They can generally take a fair amount of punishment, just depends on how much your game to risk.
User avatar
bosc0
 
Posts: 2637
Joined: Thu May 08, 2008 8:22 am
Location: Melbourne
Car: GT SpecB wagon
Real name: Jake

Re: Launching??

Postby hawks123 » Mon Feb 06, 2012 3:59 pm

I would never dump the clutch, did it a couple of times in my previous car a B4, the whole driveline made a massive THUD.
Just slip it, it's now slower and won't destroy you gearbox or other parts of you drivline.
It's much more of a challenge to get off the line as well, feels great when you do it well and keep up with the auto next to you.
If it's broke use a cable tie!
User avatar
hawks123
 
Posts: 125
Joined: Mon Mar 02, 2009 7:29 am
Location: East Melbourne
Car: MY08 GT-B & 1990 Laser GL

Re: Launching??

Postby Egg » Mon Feb 06, 2012 4:39 pm

hawks123 wrote:I would never dump the clutch, did it a couple of times in my previous car a B4, the whole driveline made a massive THUD.
Just slip it, it's now slower and won't destroy you gearbox or other parts of you drivline.
It's much more of a challenge to get off the line as well, feels great when you do it well and keep up with the auto next to you.



Thats what I used to do as well. I have an old Hi Octane video demonstrating why you shouldnt dump it. This guy was trying to do donuts in a mates Evo and after a couple of dumps you hear this funny noise, then see bits of gears rolling from underneath the car...... very funny then he hands the keys back
User avatar
Egg
 
Posts: 317
Joined: Thu Jan 24, 2008 4:27 pm
Location: Melb
Car: MY07 Spec B Wagon Pearl white
Real name: Ivan

Re: Launching??

Postby Tradewind » Tue Feb 07, 2012 6:44 am

hawks123 wrote:I would never dump the clutch, did it a couple of times in my previous car a B4, the whole driveline made a massive THUD.
Just slip it, it's now slower and won't destroy you gearbox or other parts of you drivline.
It's much more of a challenge to get off the line as well, feels great when you do it well and keep up with the auto next to you.


Thats me as well, NEVER dump the clutch. There are wallet loads of expensive stuff inside there, and even if your 20th dump didnt break it - the box is still more degraded than one which has never been dumped at all.

I never dump any AWD clutch, for those who do, enjoy the breakages when they come - what fun. :lol:
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Launching??

Postby Jelwin » Tue Feb 14, 2012 5:59 pm

ive dumped at the 5000 stationary limiter and dumped at the 7200 limiter while crawling. Ive got a Clutch Industries clutch which is only slightly better than stock. the clutch slips naturally and the engine bogs down. its stupid and a pointless waste of time, especially if you wanted to go an exedy and dump it. rev to 3500 slip the clutch to get moving and then floor it once the clutch is engaged. will save a few $$$$ because you will still have a working gearbox, clutch, diff, engine and no headache after it. not to mention a launch that is as good or better.
User avatar
Jelwin
 
Posts: 145
Joined: Mon Jul 06, 2009 6:54 pm
Location: Vic
Car: MY06 3.0r-B
Real name: Josh

Launching??

Postby Gambit » Tue Feb 14, 2012 6:17 pm

I was continually dumping my clutch at 5000-5500 rpm nothing like all four tyres lighting up in 1st, 2nd
User avatar
Gambit
 
Posts: 1856
Joined: Wed May 19, 2010 7:20 pm
Location: Melbourne
Car: Subaru

Re: Launching??

Postby Kekotic » Tue Feb 14, 2012 6:30 pm

Gambit wrote:I was continually dumping my clutch at 5000-5500 rpm nothing like all four tyres lighting up in 1st, 2nd

Almost looked like you were trying to launch in to space with that damping set so low. :)
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066

Re: Launching??

Postby Tradewind » Tue Feb 14, 2012 6:30 pm

Gambit wrote:I was continually dumping my clutch at 5000-5500 rpm nothing like all four tyres lighting up in 1st, 2nd


Dont anyone every buy the car belonging to this guy - she's gonna go real bad one day
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Launching??

Postby Gambit » Tue Feb 14, 2012 7:44 pm

Tradewind wrote:
Gambit wrote:I was continually dumping my clutch at 5000-5500 rpm nothing like all four tyres lighting up in 1st, 2nd


Dont anyone every buy the car belonging to this guy - she's gonna go real bad one day

hushhhh...... Keep it quite ;)
User avatar
Gambit
 
Posts: 1856
Joined: Wed May 19, 2010 7:20 pm
Location: Melbourne
Car: Subaru

Re: Launching??

Postby <GB> » Tue Feb 14, 2012 8:15 pm

I launched mine at 6000 plus, think if u have a 6spd Sti box it's ok with an up graded clutch I wouldn't do it in the 5 spd, u will wear your clutch out fast doing them and also put heaps of stress on the drive train engine and gear box mounts even your diff mounts and suspension bushes, be prepared to spend coin if u do them regularly
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660

Re: Launching??

Postby Ric » Tue Feb 28, 2012 8:35 am

Bring the revs up to 4000, then ease the clutch out and floor it when the clutch starts to bite.
Here's me doing it last year. (Once in a burnout to wipe mud and grass from the tyres, then again for the real start of the hillclimb)

User avatar
Ric
Site Admin
 
Posts: 6479
Joined: Fri Oct 06, 2006 11:08 pm
Location: Melbourne
Car: OLD: MY06 3RB Wagon NEW: MY21 Outbck
Real name: Ric
Profile URL: viewtopic.php?f=7&t=12

Next

Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: No registered users and 11 guests