Jaydece's Major Development Project

Show off what mods you've done to your car.

Re: Jaydece's Mini Development Project

Postby jaydece » Wed Nov 02, 2011 8:48 pm

Hey All,

I've just ordered a set of these :D

ID's 1000's kit....hopefully should be in stock in the next 1- 2 weeks...

I was looking at xspurts, five 0 and other similar brands...but I couldn't go past on the price of the ID's....plus the fact my influencer "gambit" said this would be the better option since I'm purchasing them locally....

Thanks Buddy! :D
Attachments
id1000.jpg
id1000.jpg (21.02 KiB) Viewed 4797 times
~JUSZTN~

** Our Turbo Lag Gives Those v8's A Chance **

History - MY07 Liberty TBSTI 6SPD Sedan
265kw atw on P100
290kw atw on E85 (fuel pump limited)


Past - MY16 Audi S3 Sedan
249kw atw on P98 (APR stage 1)

Present - MY18 Audi RS3 Sedan (His)
384kw atw on E85 (APR stage 2)

Present - MY17 VW Tiguan 162 R line (Hers)
User avatar
jaydece
 
Posts: 1632
Joined: Fri Apr 23, 2010 11:21 pm
Location: VIC, Berwick 3806
Car: MY18 Audi RS3 Sedan 7 SPD DSG
Real name: Justin
Profile URL: viewtopic.php?f=10&t=11864

Re: Jaydece's Mini Development Project

Postby Gambit » Wed Nov 02, 2011 8:53 pm

Nice one.. ID's are fantastic and stable at low pulse widths
User avatar
Gambit
 
Posts: 1856
Joined: Wed May 19, 2010 7:20 pm
Location: Melbourne
Car: Subaru

Re: Jaydece's Mini Development Project

Postby coyote » Wed Nov 02, 2011 8:54 pm

Nice. Only one reason you'd want them.

Note the tune to MUCH less than 1000cc.


Sent from my GT-I9100 using Tapa-fkn-talk.
Image

** Team Tony **
User avatar
coyote
 
Posts: 2207
Joined: Mon Jul 30, 2007 2:33 pm
Location: brisbane.qld.au

Re: Jaydece's Mini Development Project

Postby senator » Thu Nov 03, 2011 6:05 am

Very Nice…… DI you add a fuel reg too?

I see E85 is not that far off the cards for you…….. :twisted: :twisted: :twisted:
Not a soobi anymore, but still slightly dirty
"TEAM TONY"
User avatar
senator
 
Posts: 3217
Joined: Sun Apr 15, 2007 8:53 pm
Location: SYDNEY

Re: Jaydece's Mini Development Project

Postby jaydece » Thu Nov 03, 2011 4:33 pm

Hey Tony? I have been looking around.....any suggestions for fuel reg? guys?

seen on ebay some cheap and farked ones....
~JUSZTN~

** Our Turbo Lag Gives Those v8's A Chance **

History - MY07 Liberty TBSTI 6SPD Sedan
265kw atw on P100
290kw atw on E85 (fuel pump limited)


Past - MY16 Audi S3 Sedan
249kw atw on P98 (APR stage 1)

Present - MY18 Audi RS3 Sedan (His)
384kw atw on E85 (APR stage 2)

Present - MY17 VW Tiguan 162 R line (Hers)
User avatar
jaydece
 
Posts: 1632
Joined: Fri Apr 23, 2010 11:21 pm
Location: VIC, Berwick 3806
Car: MY18 Audi RS3 Sedan 7 SPD DSG
Real name: Justin
Profile URL: viewtopic.php?f=10&t=11864

Jaydece's Mini Development Project

Postby Gambit » Thu Nov 03, 2011 5:20 pm

Try the aeromotive catalog ;)
User avatar
Gambit
 
Posts: 1856
Joined: Wed May 19, 2010 7:20 pm
Location: Melbourne
Car: Subaru

Re: Jaydece's Mini Development Project

Postby senator » Fri Nov 04, 2011 5:36 am

jaydece wrote:Hey Tony? I have been looking around.....any suggestions for fuel reg? guys?

seen on ebay some cheap and farked ones....


I have a Tomei, Sards also make one....Phat GT supplied, fitted and tuned mine.
Not a soobi anymore, but still slightly dirty
"TEAM TONY"
User avatar
senator
 
Posts: 3217
Joined: Sun Apr 15, 2007 8:53 pm
Location: SYDNEY

Re: Jaydece's Mini Development Project

Postby jaydece » Fri Nov 04, 2011 2:53 pm

Thanks for the suggestions guys,

Was about to get a turbo smart one until I stumbled on a one off: Billet Adjustable Fuel Pressure Regulator kit (Aeromotive type) :D

Questions: -

Now excuse my ignorance....but is this something I can fit on my own?

Without a tune? or do I need to get this fitted with a tune after?

Do I have to remove my factory regulator?

Adjustments / Settings?

Other?
Attachments
Kit.jpg
Kit.jpg (28.33 KiB) Viewed 4714 times
~JUSZTN~

** Our Turbo Lag Gives Those v8's A Chance **

History - MY07 Liberty TBSTI 6SPD Sedan
265kw atw on P100
290kw atw on E85 (fuel pump limited)


Past - MY16 Audi S3 Sedan
249kw atw on P98 (APR stage 1)

Present - MY18 Audi RS3 Sedan (His)
384kw atw on E85 (APR stage 2)

Present - MY17 VW Tiguan 162 R line (Hers)
User avatar
jaydece
 
Posts: 1632
Joined: Fri Apr 23, 2010 11:21 pm
Location: VIC, Berwick 3806
Car: MY18 Audi RS3 Sedan 7 SPD DSG
Real name: Justin
Profile URL: viewtopic.php?f=10&t=11864

Jaydece's Mini Development Project

Postby Gambit » Fri Nov 04, 2011 3:11 pm

Get Scott to help fit it up in the one hit when you install your injectors otherwise get springy to do it prior to the tune , either way you will need it once you sort out the cooler and bump your fueling to suit. If that makes sense :)
User avatar
Gambit
 
Posts: 1856
Joined: Wed May 19, 2010 7:20 pm
Location: Melbourne
Car: Subaru

Re: Jaydece's Mini Development Project

Postby PHAT GT » Fri Nov 04, 2011 5:55 pm

jaydece wrote:Thanks for the suggestions guys,

Was about to get a turbo smart one until I stumbled on a one off: Billet Adjustable Fuel Pressure Regulator kit (Aeromotive type) :D

Questions: -

Now excuse my ignorance....but is this something I can fit on my own?

Without a tune? or do I need to get this fitted with a tune after?

Do I have to remove my factory regulator?

Adjustments / Settings?

Other?




just buy the real thing that way you know it works instead of look alikes
Image

WINNERS DONT DO DIFFERENT THINGS , THEY JUST DO THINGS DIFFERENT
User avatar
PHAT GT
 
Posts: 1250
Joined: Sat Oct 07, 2006 10:44 pm
Location: Sydney

Re: Jaydece's Mini Development Project

Postby jaydece » Sat Nov 05, 2011 8:54 am

Thanks Phat! Looked into this further and didn't realize it was a look alike until I went to aeromotive site to check and gambit pointed it out to me as well...

Thanks again! much appreciated! :mrgreen:
~JUSZTN~

** Our Turbo Lag Gives Those v8's A Chance **

History - MY07 Liberty TBSTI 6SPD Sedan
265kw atw on P100
290kw atw on E85 (fuel pump limited)


Past - MY16 Audi S3 Sedan
249kw atw on P98 (APR stage 1)

Present - MY18 Audi RS3 Sedan (His)
384kw atw on E85 (APR stage 2)

Present - MY17 VW Tiguan 162 R line (Hers)
User avatar
jaydece
 
Posts: 1632
Joined: Fri Apr 23, 2010 11:21 pm
Location: VIC, Berwick 3806
Car: MY18 Audi RS3 Sedan 7 SPD DSG
Real name: Justin
Profile URL: viewtopic.php?f=10&t=11864

Re: Jaydece's Mini Development Project

Postby jaydece » Sat Nov 05, 2011 9:46 am

Ordered some parts from phat and they arrived yesterday, had some free time last night and got them installed :D

Finally...I can actually rest my left arm on the middle console properly now....flush fit and good quality...thanks again phat! :mrgreen:

CBS - speaks for itself :D
Attachments
Console 2.JPG
Console 2.JPG (67.67 KiB) Viewed 4662 times
Console 1.JPG
Console 1.JPG (78.62 KiB) Viewed 4662 times
CBS.JPG
CBS.JPG (85.69 KiB) Viewed 4662 times
~JUSZTN~

** Our Turbo Lag Gives Those v8's A Chance **

History - MY07 Liberty TBSTI 6SPD Sedan
265kw atw on P100
290kw atw on E85 (fuel pump limited)


Past - MY16 Audi S3 Sedan
249kw atw on P98 (APR stage 1)

Present - MY18 Audi RS3 Sedan (His)
384kw atw on E85 (APR stage 2)

Present - MY17 VW Tiguan 162 R line (Hers)
User avatar
jaydece
 
Posts: 1632
Joined: Fri Apr 23, 2010 11:21 pm
Location: VIC, Berwick 3806
Car: MY18 Audi RS3 Sedan 7 SPD DSG
Real name: Justin
Profile URL: viewtopic.php?f=10&t=11864

Re: Jaydece's Mini Development Project

Postby Gambit » Sat Nov 05, 2011 9:51 am

Nice small touches there. I need one of those little red washers for my cusco brake stopper.
User avatar
Gambit
 
Posts: 1856
Joined: Wed May 19, 2010 7:20 pm
Location: Melbourne
Car: Subaru

Re: Jaydece's Mini Development Project

Postby jaydece » Sat Nov 05, 2011 10:09 am

Gambit wrote:Nice small touches there. I need one of those little red washers for my cusco brake stopper.



is somebody thieving stuff off your car gambit? :lol:

- right fog light cover

- red tab on cusco brake stopper

- spare wheel - ahahahahahaha just joking.....ppl on the mt macedon cruise would get this <------ :lol: :lol: :lol:
~JUSZTN~

** Our Turbo Lag Gives Those v8's A Chance **

History - MY07 Liberty TBSTI 6SPD Sedan
265kw atw on P100
290kw atw on E85 (fuel pump limited)


Past - MY16 Audi S3 Sedan
249kw atw on P98 (APR stage 1)

Present - MY18 Audi RS3 Sedan (His)
384kw atw on E85 (APR stage 2)

Present - MY17 VW Tiguan 162 R line (Hers)
User avatar
jaydece
 
Posts: 1632
Joined: Fri Apr 23, 2010 11:21 pm
Location: VIC, Berwick 3806
Car: MY18 Audi RS3 Sedan 7 SPD DSG
Real name: Justin
Profile URL: viewtopic.php?f=10&t=11864

Re: Jaydece's Mini Development Project

Postby Gambit » Sat Nov 05, 2011 10:13 am

haha funny stuff.. :lol:

tell me about it, the never ending saga continues..
trying to save coin to finish the car and i keep spending it on other crap i shouldn't need :roll: oh well....
User avatar
Gambit
 
Posts: 1856
Joined: Wed May 19, 2010 7:20 pm
Location: Melbourne
Car: Subaru

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 4 guests