Gambit's Project

by **cruisn** » Sat Sep 24, 2011 3:39 pm

Nice work on the brakes. :good:

by **Gambit** » Sat Sep 24, 2011 4:57 pm

Thanks buddy, so is anyone free tomorrow to lend a hand installing these suckers. Have never done a brake install, though surely it's pretty easy

by **smythie** » Sat Sep 24, 2011 5:29 pm

sorry, I'll be under mine stuffing about with shift bushes.

Nice calipers by the way.

by **cruisn** » Sat Sep 24, 2011 6:22 pm

Brakes are pretty easy, you will need two people to bleed them though or a brake bleeder.

Id help if I hadnt already spent half the day today fitting parts to someones car. I dont think the missus will take too kindly to doing again tomorrow.

by **Gambit** » Sat Oct 01, 2011 4:49 pm

had time this morning to pop this sucker in..

by **Stu** » Mon Oct 03, 2011 11:15 pm

Hey Gambit, I was only just thinking about getting one of those pumps. Given the "stealth" name are they any quieter than say a walbro, or the other big noisy pumps??

by **Gambit** » Tue Oct 04, 2011 7:05 am

Stu wrote:Hey Gambit, I was only just thinking about getting one of those pumps. Given the "stealth" name are they any quieter than say a walbro, or the other big noisy pumps??

Stu , they are super quiet, about 60% less noisy than the walbro.

by **senator** » Tue Oct 04, 2011 8:45 am

How did the brake install go?????

by **Gambit** » Tue Oct 04, 2011 10:40 am

senator wrote:How did the brake install go?????

Nah Have not done it yet, car is a daily and realised the ds3000 ferodo pads are not suitable for my daily commute, apparently very loud! Although I am tempted just to whack them on

by **hamish_023** » Tue Oct 04, 2011 10:42 am

Gambit wrote:
senator wrote:How did the brake install go?????

Nah Have not done it yet, car is a daily and realised the ds3000 ferodo pads are not suitable for my daily commute, apparently very loud! Although I am tempted just to whack them on

Where'd you pick the alcon's up from?

by **Gambit** » Tue Oct 04, 2011 11:35 am

hamish_023 wrote:
Gambit wrote:
senator wrote:How did the brake install go?????

Nah Have not done it yet, car is a daily and realised the ds3000 ferodo pads are not suitable for my daily commute, apparently very loud! Although I am tempted just to whack them on

Where'd you pick the alcon's up from?

Got them from Kris in the end

by **I Wish** » Wed Oct 05, 2011 2:06 pm

What model is the fuel pump?

Any modifications required to the wiring etc?

by **Gambit** » Wed Oct 05, 2011 4:31 pm

I Wish wrote:What model is the fuel pump?

Any modifications required to the wiring etc?

Aeromotive stealth 340 , no mods to wiring, straight plug and play.

by **3rspecb** » Wed Oct 05, 2011 5:53 pm

Gambit wrote:
I Wish wrote:What model is the fuel pump?

Any modifications required to the wiring etc?

Aeromotive stealth 340 , no mods to wiring, straight plug and play.

Where from and how much if you don't mind me asking ? also If you run the fuel tank to empty does this pump overheat like the SARD intank pump?

by **I Wish** » Wed Oct 05, 2011 6:01 pm

Is it the 11142 model? As there are 3 in the 340 range.

http://www.jegs.com/p/Aeromotive/Aeromo ... 6/10002/-1

Gambit's Project

Re: Gambit's Development Project

Gambit's Development Project

Re: Gambit's Development Project

Re: Gambit's Development Project

Re: Gambit's Development Project

Re: Gambit's Development Project

Gambit's Development Project

Re: Gambit's Development Project

Gambit's Development Project

Re: Gambit's Development Project

Gambit's Development Project

Re: Gambit's Development Project

Gambit's Development Project

Re: Gambit's Development Project

Re: Gambit's Development Project

Who is online