Tuning, diagnostics, ECUs and associated bits and bytes
Forum rules
Please respect copyright.
Do not post full copies of professionally tuned roms!
by tangcla » Tue Aug 30, 2011 2:03 pm
Has anyone used a 64-bit Windows installation to flash an ECU? If so, are different drivers (or software) required?
www.tangcla.com - photographyCanon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
-
tangcla
-
- Posts: 7409
- Joined: Wed Aug 15, 2007 1:47 pm
- Location: Melbourne, VIC
- Car: B6 Audi S4 (4.2L V8)
- Real name: Clarence
- Profile URL: http://www.tangcla.com
-
by brainy » Tue Aug 30, 2011 9:07 pm
Have you tried just connecting to the ecu to see if you can read it?
I've used 64 Bit Windows to reset ecu error codes before.
MY08 Liberty GT Spec B
-
brainy
-
- Posts: 520
- Joined: Wed Sep 23, 2009 9:45 am
- Location: Melbourne
- Car: MY08 Liberty GT Spec B
Return to Tuning
Who is online
Users browsing this forum: No registered users and 1 guest