Liberty Exhausts

[TorpedoCreative]

Fitting quad tip or twin angle cuts?

I've gone for single 3.5" angle cuts with it tucked under the bumper so its kinda stock looking (quads are sooo 2010 ) j/jk heheee

Cheers James,
Can I ask who did the install for you?

Cheers Jeff

I went to Carline mufflers in west perth... The owner is Peter. I went there with my last Lib GT because it was close for work but now I go there because he takes pride in what he does and he is a decent bloke.
Are you coming to the cruise ina few weeks? http://forum.liberty.asn.au/viewtopic.php?f=35&t=12622

cheers
J

[jeffas4966]

Will try for the cruze, but we only have one car and the weekends are usually chokkers

Cheers for the info, very close to my work (in the city)

[TorpedoCreative]

Will try for the cruze, but we only have one car and the weekends are usually chokkers

Cheers for the info, very close to my work (in the city)

no probs... drop the family at the Casino
....always a good opportunity to put a face to a name and hear/compare exhausts/mods etc

cheers
J

[stew07gt]

Fitting quad tip or twin angle cuts?

I've gone for single 3.5" angle cuts with it tucked under the bumper so its kinda stock looking (quads are sooo 2010 ) j/jk heheee

how much did this cost to get done if you dont mind me asking?

[TorpedoCreative]

Fitting quad tip or twin angle cuts?

I've gone for single 3.5" angle cuts with it tucked under the bumper so its kinda stock looking (quads are sooo 2010 ) j/jk heheee

how much did this cost to get done if you dont mind me asking?

The tips were $35 each plus labour.. Peter did a special and just swapped the tips no charge.
Im REALLY happy with the result but rather than hi-jack Robs thread (anymore than I already have ) I will post the mod in the exhaust section with pics later this week
cheers
J

[ULTREX]

I think that muffler being split in to 2 tips maybe tricky as the muffler is 4 inche and most shops wont have the 4inch in to twin tip section to add.....Interested to see James!

cheers

[hamish_023]

Rob, any luck getting twinscroll (04-06) Dump pipe

[ULTREX]

Rob, any luck getting twinscroll (04-06) Dump pipe

Sorry about the delay - all got pushed back - prototype is being done next Thursday

then will be a few weeks before I have a 'finished' product that will need testing again before mass produced

cheers

[hamish_023]

Price for dump only?

[ULTREX]

I will know more once I have the bills for all the work....But rest assured it will be worth waiting for

[Jtek]

Hi Rob, is there a resonator in the centre pipe? Can't see one If there's one fitted, how big is it?
Cheers

[jacks-GTB]

hey rob.....PM'D

[miller0]

Is a retune required if you change the exhaust from the cat-back only?

[stew07gt]

Is a retune required if you change the exhaust from the cat-back only?

no not really.

Also Rob, any further word on twin tips or twin scroll dumps?

[miller0]

Is a retune required if you change the exhaust from the cat-back only?

no not really.

Where are the stock sensors located?
I don't want to risk throwing any CELs... If the cat-back can be replaced and the ECU knows no different, I'll be a very happy man.

I'm new to the Liberty scene, so apologies for the questions.