Hi Guys
Been trawling the forum and I can't see if there is a ISO harness aavailable for the Mac units to connect a cark kit anyone seen anything?
Cheers
Joel
Australian Liberty Owners Club
MY07 Mac Unit
4 posts
• Page 1 of 1
MY07 Mac Unit
by CheesyMong » Sun Jan 30, 2011 5:55 pm
- CheesyMong
- Posts: 386
- Joined: Thu Jul 05, 2007 12:58 pm
- Location: Perth
- Car: MY07 Liberty GT-B 6MT
Re: MY07 Mac Unit
by cpitts » Mon Jan 31, 2011 4:38 am
In short. No.
The amp is connected via a 21pin DIN that i have the pinouts for but can't find a female connector to make the break-out cabe for.
The loom going into the back of the McIntosh is standard Subaru though, so if you have a Subaru to ISO you can at least plug in std power, acc, dim, etc but the speakers won't work.
Upgrading the MY07 GTB stereo gets costly after you do the basics (speakers and deadening).
The amp is connected via a 21pin DIN that i have the pinouts for but can't find a female connector to make the break-out cabe for.
The loom going into the back of the McIntosh is standard Subaru though, so if you have a Subaru to ISO you can at least plug in std power, acc, dim, etc but the speakers won't work.
Upgrading the MY07 GTB stereo gets costly after you do the basics (speakers and deadening).
- cpitts
- Posts: 1286
- Joined: Thu Sep 04, 2008 8:54 pm
- Location: Melbourne, AU
Re: MY07 Mac Unit
by CheesyMong » Fri Feb 04, 2011 11:19 pm
ISO seems a bit overkills considering I will just need ground, acc and 12v constant, anyone know which colours those 3 are?
Cheers
Joel
Cheers
Joel
- CheesyMong
- Posts: 386
- Joined: Thu Jul 05, 2007 12:58 pm
- Location: Perth
- Car: MY07 Liberty GT-B 6MT
Re: MY07 Mac Unit
by mitchy_bobby » Thu May 10, 2012 11:11 am
Yellow/Red Cable is the ACC 12+
Black is the GND
they are pins 10 and 11 i beleive.
Black is the GND
they are pins 10 and 11 i beleive.
-
mitchy_bobby - Posts: 90
- Joined: Mon Feb 21, 2011 8:28 am
- Location: Country. NSW
- Car: MY02 Heritage & MY08 GT Spec B
- Real name: Mitch
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 9 guests