20" rims fitment question

Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres

20" rims fitment question

Postby LGT-05T » Thu May 27, 2010 7:27 pm

hey guys,
i have a set of 5 AME 20" rims in my garage, i tryed fiting them to the car but at the front the tyre actually hits the base of the shock (the part/base where springs sit). my question is does anyone or has anyone had this problem and have they still kept the standard struts or have they changed to coilovers cause they're not as wide?
also the rim size is 20x8.5 +45 offset, running 225 / 35 / 20 tyre and the car is lowered.

cheers steve
-----------Image----------
User avatar
LGT-05T
 
Posts: 340
Joined: Tue Dec 02, 2008 8:31 pm
Location: wollongong
Car: 05 GT
Real name: steve

Re: 20" rims fitment question

Postby 04GTLIB » Thu May 27, 2010 8:08 pm

LGT-05T wrote:hey guys,
i have a set of 5 AME 20" rims in my garage, i tryed fiting them to the car but at the front the tyre actually hits the base of the shock (the part/base where springs sit). my question is does anyone or has anyone had this problem and have they still kept the standard struts or have they changed to coilovers cause they're not as wide?
also the rim size is 20x8.5 +45 offset, running 225 / 35 / 20 tyre and the car is lowered.

cheers steve


Steve.
Our wagon is fitted with H&R springs and is currently running 225/35's on Lenso 20" x 8.5" rims with a +45 offset and there is no rubbing or clearance issues.
I would double check the offset info on the wheel or better still, measure it yourself to be double sure.

Cheers,
Rusty.
19" Koya wheels - STI front lip - STI Scuff Plates - STI Shift Knob - STI Pedal Set - Blitz A/C filter - Battery and ABS covers - Hyperflow TMIC - Auto Meter boost gauge and fabricated pod - EXOTIC EXHAUST ceramic coated dump pipe, hi flow cat, 3" centre pipe and fabricated rear mufflers - BC Racing Coil Overs - Phat lower control arm bushes - Whiteline rear camber bushes - Rallitek end links - Valenti LED tail lights - DBA Slotted rotors - QFM pads - Goodridge Brake Lines.
Coming soon - Spec B front - Kinugawa turbo upgrade
User avatar
04GTLIB
 
Posts: 849
Joined: Fri Feb 20, 2009 10:18 pm
Location: Brisbane
Car: MY04 GT Liberty Wagon
Real name: Russell

Re: 20" rims fitment question

Postby sh1ft » Thu May 27, 2010 8:43 pm

steve,

had the same issue with my BMW, swap the tyres for a set of 225/30's. that will get them on, unless you want to fork out for coilovers...
User avatar
sh1ft
 
Posts: 74
Joined: Wed May 06, 2009 6:16 pm
Location: Brighton, VIC
Car: ''09 Lib wagn

Re: 20" rims fitment question

Postby Arith » Thu May 27, 2010 9:25 pm

You could always get spacers as well. All depends on your budget.

[ Former Liberty ... Slightly Modified -> Click
here for modifications & profile ]
User avatar
Arith
-stickered-
 
Posts: 6111
Joined: Mon Oct 08, 2007 2:05 am
Location: Sydney (Wes-Sieed!)
Car: MY11 Volvo S60 T6
Real name: Jim

Re: 20" rims fitment question

Postby LGT-05T » Sat May 29, 2010 1:45 pm

ok check and measured rim and yes the same as it says, and yes i want a set of coilovers but can't really afford it at this present time. i do have spacers here that came with the rims but if i put them on the rim will stick out of the gaurd alot and i do not want that as they stick out a bit already. the only way i might have to go is to change the tyres as sh1ft says to fit them or get rid off the rims and get new ones. i should have just paid the money and got a new set the first time.
cheers steve.
-----------Image----------
User avatar
LGT-05T
 
Posts: 340
Joined: Tue Dec 02, 2008 8:31 pm
Location: wollongong
Car: 05 GT
Real name: steve

Re: 20" rims fitment question

Postby sh1ft » Mon May 31, 2010 1:04 pm

if the tyres fitted to the rims currenty are in good condition, most tyre places trade in tyres (may not get that much offered), or have them removed and sell them on here/ebay or something, least you have std rims to roll around on til you plan out what to do or save up the $$$
User avatar
sh1ft
 
Posts: 74
Joined: Wed May 06, 2009 6:16 pm
Location: Brighton, VIC
Car: ''09 Lib wagn


Return to Suspension, Brakes, Wheels and Tyres.

Who is online

Users browsing this forum: No registered users and 15 guests