Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres
by Woodduck » Sun Mar 28, 2010 1:45 am
Are most subaru brembos the same? If i was to get 2004 WRX STi brembos, would they fit the lib (obviously with the adaptor for the rears)? Or is there a certain year i havto stick to? May be a silly question but im better off being sure

Off topic, how much would a set of rotors for brembos set me back roughly?
'06 LIBERTY 3.0R SPEC B SEDAN --- 6SP Manual - 19" Kahn RS-V rims - V-Tune - STI Short Shifter - Tein S-techs - Corazon Grill - Phats Quad Mufflers - STi front lip - Brembo brakes with slotted rotors - More to come


-

Woodduck
-
- Posts: 813
- Joined: Tue Oct 07, 2008 2:39 pm
- Location: Mildura, Vic
- Car: '06 3.0R spec B
- Real name: Carl
by tangcla » Sun Mar 28, 2010 8:15 am
Any Brembo from 01-04 STi will fit fine, calipers and rotors. Re-use your existing lines with a washer.
www.tangcla.com - photographyCanon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
-

tangcla
-
- Posts: 7409
- Joined: Wed Aug 15, 2007 1:47 pm
- Location: Melbourne, VIC
- Car: B6 Audi S4 (4.2L V8)
- Real name: Clarence
- Profile URL: http://www.tangcla.com
-
by tangcla » Sun Mar 28, 2010 9:12 am
Brembo front and rear calipers with rotors and lines cost me $2000 delivered.
www.tangcla.com - photographyCanon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
-

tangcla
-
- Posts: 7409
- Joined: Wed Aug 15, 2007 1:47 pm
- Location: Melbourne, VIC
- Car: B6 Audi S4 (4.2L V8)
- Real name: Clarence
- Profile URL: http://www.tangcla.com
-
Return to Suspension, Brakes, Wheels and Tyres.
Who is online
Users browsing this forum: No registered users and 25 guests