Australian Liberty Owners Club

Skip to content

Phat quads in gunmetal - pics an vid (Now without rust!)

Show off what mods you've done to your car.
Post a reply

Phat quads in gunmetal - pics an vid (Now without rust!)

Postby nytrojen » Fri Mar 26, 2010 6:04 pm

So I finally got a pic for u guys and a vid clip. This is after fixing the rust inside the tips ;) Also - I'm well aware that the left tip is lower than the right. I just cbf fixing it :P

DSCF0261.jpg
DSCF0261.jpg (224.68 KiB) Viewed 5829 times


nytrojen
-stickered-
 
Posts: 1572
Joined: Tue Apr 14, 2009 6:14 pm
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby teK-- » Fri Mar 26, 2010 6:31 pm

Hey Avon welcome to team quads :D
MY04 2.5i Safety 5MT Sedan "Project Locomotive"
..: JDM Subaru-AVO-Whiteline-Bilstein-Swift Springs-Cusco-Rallitek-GT Brakes-Remsa-K4RT30Y-Blitz-Philips-Défi-STI-Sabelt-Redline-Alpine-Polk Audio-Kenwood-Dynamat :..
User avatar
teK--
-stickered-
 
Posts: 4064
Joined: Thu Jun 11, 2009 5:02 pm
Location: Melbourne
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby nytrojen » Fri Mar 26, 2010 6:33 pm

Yay! I'm finally in the team! :yahoo:
nytrojen
-stickered-
 
Posts: 1572
Joined: Tue Apr 14, 2009 6:14 pm
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby julzzychan » Sat Mar 27, 2010 5:21 pm

HELL YEHH!
Cheers,

Julz

Current - -> MY07 Liberty TBSTI Sedan Black #139/300 - Charcoal Rims, Phat Dump/ Mid pipe, K&N Filter

AWD - SOLD -> MY07 Liberty Obsidian Black[/b] BL5 EJ255 6SP Manual - STI'ed
| 6000K HID | LED I/O | STi Front/Rear Lip Spoilers | STI Braided Brake Lines | Silver 18" x 7.5 Enkei | Phat Dump Pipe | Centre - S/S Flex with 3" Resonator joint with 2.5" S/S Y split to M/S Hurricane Quad Mufflers | Blackened Grill | CF Stanza Eye Lid | Factory Sat-Nav | Resonator Delete | 50% Smoked Taillight | K2 Roof Finisher | Zero Side Strake Pair | DAMD Rear Extension pair | Cobb SF Intake Black | Grimspeed 3-port BCS | AVO Turbo Inlet + 265lph Fuel Pump | KidoTuned 189kW ATW |

1WR - SOLD -> MY06 Honda Black/Grey CBR600RR | Jardine RT-One Slip-On Pipe | ASV Lever | Diable Rosso II | Braided Brake Lines | Quick Shifter | PCIII
User avatar
julzzychan
-stickered-
 
Posts: 728
Joined: Mon Aug 06, 2007 3:28 pm
Location: Clayton, Melbourne
Car: 07 Liberty TBSTI #139/300
Real name: Julzzy
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby Lukovitch » Sat Mar 27, 2010 6:34 pm

I derive a perverse pleasure from setting off car alarms with my Phats.... :twisted:
Fast & Functional.
User avatar
Lukovitch
 
Posts: 246
Joined: Mon Sep 15, 2008 2:44 am
Location: Melbourne
Car: 2008 GTB Wagon
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby nytrojen » Sat Mar 27, 2010 7:37 pm

Lukovitch wrote:I derive a perverse pleasure from setting off car alarms with my Phats.... :twisted:


I have yet to set off car alarms... but rest assured, i'm on the case!
nytrojen
-stickered-
 
Posts: 1572
Joined: Tue Apr 14, 2009 6:14 pm
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby smythie » Mon Mar 29, 2010 9:54 am

Lukovitch wrote:I derive a perverse pleasure from setting off car alarms with my Phats.... :twisted:
tee hee hee
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby julzzychan » Sun Apr 11, 2010 5:53 pm

the car sound different to mine...weird

Cheers,

Julz

Current - -> MY07 Liberty TBSTI Sedan Black #139/300 - Charcoal Rims, Phat Dump/ Mid pipe, K&N Filter

AWD - SOLD -> MY07 Liberty Obsidian Black[/b] BL5 EJ255 6SP Manual - STI'ed
| 6000K HID | LED I/O | STi Front/Rear Lip Spoilers | STI Braided Brake Lines | Silver 18" x 7.5 Enkei | Phat Dump Pipe | Centre - S/S Flex with 3" Resonator joint with 2.5" S/S Y split to M/S Hurricane Quad Mufflers | Blackened Grill | CF Stanza Eye Lid | Factory Sat-Nav | Resonator Delete | 50% Smoked Taillight | K2 Roof Finisher | Zero Side Strake Pair | DAMD Rear Extension pair | Cobb SF Intake Black | Grimspeed 3-port BCS | AVO Turbo Inlet + 265lph Fuel Pump | KidoTuned 189kW ATW |

1WR - SOLD -> MY06 Honda Black/Grey CBR600RR | Jardine RT-One Slip-On Pipe | ASV Lever | Diable Rosso II | Braided Brake Lines | Quick Shifter | PCIII
User avatar
julzzychan
-stickered-
 
Posts: 728
Joined: Mon Aug 06, 2007 3:28 pm
Location: Clayton, Melbourne
Car: 07 Liberty TBSTI #139/300
Real name: Julzzy
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby teK-- » Sun Apr 11, 2010 6:31 pm

smythie wrote:
Lukovitch wrote:I derive a perverse pleasure from setting off car alarms with my Phats.... :twisted:
tee hee hee


We used to do that too when we first got our license and were hoons ;) Jam Factory carpark was a hoot, many many levels of alarm goodness we'd only do it when leaving the carpark of course.
MY04 2.5i Safety 5MT Sedan "Project Locomotive"
..: JDM Subaru-AVO-Whiteline-Bilstein-Swift Springs-Cusco-Rallitek-GT Brakes-Remsa-K4RT30Y-Blitz-Philips-Défi-STI-Sabelt-Redline-Alpine-Polk Audio-Kenwood-Dynamat :..
User avatar
teK--
-stickered-
 
Posts: 4064
Joined: Thu Jun 11, 2009 5:02 pm
Location: Melbourne
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby nytrojen » Sun Apr 11, 2010 9:09 pm

julzzychan wrote:the car sound different to mine...weird



Hmm... you're right! I reckon sound better ;) Ur sound a bit wheezier. Wonder why that is??
nytrojen
-stickered-
 
Posts: 1572
Joined: Tue Apr 14, 2009 6:14 pm
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby teK-- » Sun Apr 11, 2010 9:13 pm

Could be because his engine is dead cold (look at all those vapors!). It's not good to be revving an engine from a cold start.
MY04 2.5i Safety 5MT Sedan "Project Locomotive"
..: JDM Subaru-AVO-Whiteline-Bilstein-Swift Springs-Cusco-Rallitek-GT Brakes-Remsa-K4RT30Y-Blitz-Philips-Défi-STI-Sabelt-Redline-Alpine-Polk Audio-Kenwood-Dynamat :..
User avatar
teK--
-stickered-
 
Posts: 4064
Joined: Thu Jun 11, 2009 5:02 pm
Location: Melbourne
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby cruisn » Sun Apr 11, 2010 9:26 pm

Team quads? LOL

Team JDM single's is where its at. :mrgreen:

Sounds very nice though Avon. :D
User avatar
cruisn
 
Posts: 6560
Joined: Tue Nov 03, 2009 8:09 pm
Location: Melbourne
Car: MY02 GTB E Tune
Real name: Mark
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby julzzychan » Sun Apr 11, 2010 9:29 pm

teK-- wrote:Could be because his engine is dead cold (look at all those vapors!). It's not good to be revving an engine from a cold start.


i know that...but still...providing i have driven the quads for nearly 9months-ish and i still recogns hes sounded better...:( but i have done about 6000k minimum so might be yours would sound the same after you've driven for a while longer. anyhow i might go to a mechanic to check it out soon :)

could be different car model...but i doubt it.
Cheers,

Julz

Current - -> MY07 Liberty TBSTI Sedan Black #139/300 - Charcoal Rims, Phat Dump/ Mid pipe, K&N Filter

AWD - SOLD -> MY07 Liberty Obsidian Black[/b] BL5 EJ255 6SP Manual - STI'ed
| 6000K HID | LED I/O | STi Front/Rear Lip Spoilers | STI Braided Brake Lines | Silver 18" x 7.5 Enkei | Phat Dump Pipe | Centre - S/S Flex with 3" Resonator joint with 2.5" S/S Y split to M/S Hurricane Quad Mufflers | Blackened Grill | CF Stanza Eye Lid | Factory Sat-Nav | Resonator Delete | 50% Smoked Taillight | K2 Roof Finisher | Zero Side Strake Pair | DAMD Rear Extension pair | Cobb SF Intake Black | Grimspeed 3-port BCS | AVO Turbo Inlet + 265lph Fuel Pump | KidoTuned 189kW ATW |

1WR - SOLD -> MY06 Honda Black/Grey CBR600RR | Jardine RT-One Slip-On Pipe | ASV Lever | Diable Rosso II | Braided Brake Lines | Quick Shifter | PCIII
User avatar
julzzychan
-stickered-
 
Posts: 728
Joined: Mon Aug 06, 2007 3:28 pm
Location: Clayton, Melbourne
Car: 07 Liberty TBSTI #139/300
Real name: Julzzy
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby nytrojen » Sun Apr 11, 2010 9:45 pm

Don't forget mine are second hand, so they've been well run in before that. Also - my engine was very warm when i took that vid - had just done some spirited driving to hear the new zorst ;)

Oh, and cheers Mark! :D
nytrojen
-stickered-
 
Posts: 1572
Joined: Tue Apr 14, 2009 6:14 pm
Top

Re: Phat quads in gunmetal - pics an vid (Now without rust!)

Postby Arith » Sun Apr 11, 2010 11:13 pm

Technically it's third hand, because these were originally on my car for 3 months before I replaced them with stainless steel. :P I don't know what it is, but these were truly quieter and sounded better than my current stainless set. You wanna sell them back to me? :P

[ Former Liberty ... Slightly Modified -> Click here for modifications & profile ]
User avatar
Arith
-stickered-
 
Posts: 6111
Joined: Mon Oct 08, 2007 2:05 am
Location: Sydney (Wes-Sieed!)
Car: MY11 Volvo S60 T6
Real name: Jim
Top
Next
Post a reply

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 45 guests

Powered by phpBB® Forum Software © phpBB Group