overl0ad wrote:how did u manage to get your tom tom to sit where it is? i don't really wanna make a custom bracket. so i've just stuck the navman onto the actual radio faceplace for now, but, that makes changes stations a pain as well as getting in the way of 1 and 3rd gears if i don't set it up right. (yes, i've got a tomtom and navman)
I purchased a bendable mount clip that suited this model of the Tom Tom One and then bent the metal mount so it would bend around the closed bottom lip of the cubby door. Then I cut a 1mm slit that was the same width as the bendable mount tongue into the facia that is directly underneath and covered by cubby door and feed the other of the mount through this slit and wrapped it around the underside of the recess behind the cubby. Put some small self adhesive
stoppers at certain contact points to stop the rubbing and hitting of surfaces when the car was in motion ! Worked a treat, I could remove my GPS from the
holder and take away, I could still open the cubby door at anytime including when the Tom Tom was mounted and I used an inline power convertor that has the
mini usb to provide power to the Tom Tom !
Arkon Bendable Mount

In-line Tom Tom charger

