Page 1 of 3

aekOne's BD Liberty Journey

PostPosted: Tue Feb 24, 2009 9:22 pm
by aekOne
Just re-edited this to clean the post up a bit...

MODS:

Engine/Performance: 210kw at wheels // 565 ft/lbs

EJ205
IHI VF22
FMIC
V4 Sti Headers
3” X-Force Dump and centre pipe
Prodrive Stage 2 Muffler
EMS ECU
EMS Coil Ignitors
STI Forged Rods
CP Forged Pistons
ARP Head Studs
ACL Bearings
Cometic Race Gaskets
Grimmspeed Phenolic Spacers
Turbosmart Fuel Pressure Regulator
Turbosmart eBoost Street Boost Controller
Greddy/Trust Turbo Timer
Greddy/Trust Type RS BOV
Bosch Fuel Pump
ARC Oil cooler
STI 1.3 Bar Radiator Caps
Carbon Fiber Cam Belt Cover
Hioctane Racing Airbox
Apexi POD Filter

Drivetrain:

MY03 WRX 5 Speed Box
Exedy Clutch
Extreme Lightened Flywheel

Suspension/Handling

MD Coilovers
Cusco Front Strut Brace with Brake Cylinder Stopper
Prodrive Rear Strut Brace
Prodrive Lower Chassis H-Brace
White Line Front and Rear Heavy Duty Sway Bars inc Links

Brakes

MY99 STI 4 Pot front and 2 Pot rear Brakes
DBA T2 Slotted Rotors
Kartboy Dogbones
Galfer FDRX1088 Brake Pads

Exterior

Rays/Volk Racing SE37 17” x 7.5” Matte Black
Project Mu Wheel Nuts
Ganador Aero Mirrors
Hippo Sleek Front Grill
Hippo Sleek Front Bar
Talon Rear Spoiler
JDM Projector Headlights
Clear Side Repeaters
20% Tints

Interior

Defi Boost, Oil Pressure and Water Temp Gauges
GC8 STI seats.
STI Pedals
Prodrive Shift Knob

Enjoy

Image

Image

Image

Image

Image

PostPosted: Tue Feb 24, 2009 9:24 pm
by WhiteGTB
Nice, Team White :)

Welcome mate, might have to do a white shoot sometime soon..

PostPosted: Tue Feb 24, 2009 9:33 pm
by aekOne
thanks mate! Yeah a photoshoot sounds sweet :) keep me posted!

PostPosted: Tue Feb 24, 2009 9:55 pm
by smythie
Nothing to be ashamed of with that beastie :good:

PostPosted: Tue Feb 24, 2009 9:58 pm
by Mano™
Hye mate welcome.. yeah don't be ashamed.. nothing wrong with it.. got a snail tony don't :P (yet)

PostPosted: Tue Feb 24, 2009 11:05 pm
by Arith
Nice! Very nice! And judging by the dyno you posted up in another thread it's quite the beasty! :P

PostPosted: Wed Feb 25, 2009 7:54 am
by aekOne
thanks guys! yeah it goes pretty good at the moment. i'm upgrading to a 3" exhaust next week and winding up the boost from 10psi to 18psi so fingers crossed we can get a bit more get up and go out of her!!


:D

PostPosted: Wed Feb 25, 2009 12:50 pm
by Shags
Welcome!

PostPosted: Sun Mar 01, 2009 12:05 am
by aekOne
thanks mate!

PostPosted: Sun Mar 01, 2009 10:36 am
by Fangin_RX
Welcome champ, all of a sudden alot more older model Libs are popping up :shock:

PostPosted: Mon Mar 02, 2009 7:05 am
by gumbyy
Welcome to the forum mate, clean lookin ride you got there.

PostPosted: Thu Apr 16, 2009 5:06 pm
by aekOne
thanks mate :)

ps: i've updated the first post to include the full story of my cars evolution

PostPosted: Thu Apr 16, 2009 5:19 pm
by Subie Boy
wow, what a beast....I am surprised I never came accross this thread before! Welcome and nice car you have there! So you go to A&B Motorsports too do you? Where do you live? I been going there for years as well....as I live in the Northern Beaches as well! :lol:

PostPosted: Thu Apr 16, 2009 9:11 pm
by Digital
screw that i want the toy model lib!!

seriously, welcome and nice work and post!

anyone seen some replica liberty toy models anywhere?

end of post hijack!

PostPosted: Thu Apr 16, 2009 10:42 pm
by aekOne
lol thanks guys :)

yeah mate get lots of stuff done down at A&B. They do all my major engine work like the conversion and rebuild. Louie has started working back there full time too which is great as he has huge knowledge of subarus and what you can and can't do with them...if you go past tomorrow you should see mine getting done as the engine is getting assembled and dropped back in the arvo

i might get Justin from Tweekit to do my next tune though as he used to work for Haltech so is probably one of the most qualified guys on the Northern Beaches to do it

For the smaller stuff i get the guys at Cromer Exhaust Centre to do it as it's about 300 meters from work which is handy.

I actually live in Summer Hill at the moment but have been working in Dee Why for 6 years so get the majority of my car stuff done down there. I'm in the market to buy a unit at present and am looking to move somewhere between Freshwater and Narrabeen so hopefully i'll be living down there soon. The drive everyday is killing me!! Where abouts are you on the Beaches?? I haven't really seen many Libs with work done on them down that way (except for another Gen 2 that looks almost the same as mine but not sure if it's had a conversion or not?)??

haha yeah mate that lib model came from Japan as well. One of the guys i work with is married to a Japanese bird so goes over there a few times a year and always brings me back something good. I've got that one and 4 smaller penny racers - a gen 1 RS, gen 2 GTB, Gen 3 GTB, Gen 4 GT :D I've seen them on ebay from time to time

cheers

Aek