Page 1 of 2

my liberty conversion :)

PostPosted: Sun Jan 25, 2009 6:04 pm
by alexxxz
Have been a member for a bit on this forum (mostly reading) finally got some pics/car running/motivation to get a thread going.

owned it for roughly 3.5 years now and since day dot i've wanted to convert it.

-MY 96 wrx motor,
-MY 97 TT 4.11 manual box with rear LSD,
-V3 sti intake manifold,
-V3 sti ecu,
-V3 sti top mount cooler,
-V3 440cc yellow injectors,
-V3 AFM,
-IHI VF35 running ~15psi,
-MY 06 Liberty GT 316mm front Brakes/290mm rear
-rx coil pack with v4 leads,
-3" x-force tbe with MRT 3" rear muffler,
-greddy profec spec b 2,
-new exedy clutch,
-wrx radiator,
-gtb airbox,
-my02 sti struts (still working out spring situation),
-assorted silicon bits
-zerosports afm-turbo pipe

bits that don't make it go fast but look good:

-Gen 3 B4 RSK front seats (driver electric)
-JDM projectors
-JDM Gen2 Turbo bonnet
-JDM Gen2 front grille
-MY 07 Spec B Liberty 18" wheels wrapped with 225/40/18 Kuhmos
-MY 08 wrx gear knob

Still to go - front bar spray, rear bar spray, gen2 gtb rear wing.

couple pics:
Image
Image
Image
Image
Image

feedback/comments welcome.

PostPosted: Sun Jan 25, 2009 6:15 pm
by Mano™
Hey mate, welcome to the forums..

Looks good, congrats :) keep it up! some of the specs nearly the same to what I had running in my wagon..

Nice effort!

You sat it on dyno yet?

PostPosted: Sun Jan 25, 2009 8:59 pm
by SMI77
Hi and welcome to the forum.
A silver wagon I see. Yeah!!!
Enjoy the site.

PostPosted: Sun Jan 25, 2009 9:06 pm
by WhiteGTB
Welcome buddy. Enjoy the site.

PostPosted: Sun Jan 25, 2009 9:13 pm
by alexxxz
thanks guys,

no dyno yet but is on the cards in the next week or so!!

so is WSID!

PostPosted: Sun Jan 25, 2009 9:43 pm
by Arith
Welcome to the forum. Car looks great! Sounds like you've been quite involved in cruises and outings. Where are you located if I may ask?

PostPosted: Sun Jan 25, 2009 9:48 pm
by alexxxz
wollongong,

member of rslibertyclub, ozlib, subyclub, rexnet, wrx club, this club, ozfoz, gtrydaz.

i tag along to all the cruises, all the guys don't seem to mind having a liberty around (wrx cruises). liberty cruises i fit right in :D

PostPosted: Mon Jan 26, 2009 11:00 am
by loweart
Welcome to the forums mate !

I love your ride and the colour co-ordination you've done under the bonnet with the RED ignition leads and hoses etc.... very nice

PostPosted: Mon Jan 26, 2009 2:22 pm
by libsti
welcome to our forum,it looks like you get around a bit.

PostPosted: Mon Jan 26, 2009 6:42 pm
by moggy
Welcome, that engine bay looks the goods! :)

8) Bob.

PostPosted: Mon Jan 26, 2009 8:45 pm
by swingn
Welcome mate!

Good to see another member of "Team Wagon" :D

Looks like you've done a fair bit of work... When you do hit the dyno, what sort of figures are you expecting / hoping for?

Where abouts in the Gong are you?

PostPosted: Mon Jan 26, 2009 9:06 pm
by alexxxz
i'm in the figtree area :)

i'm after roughly 160kw atw... really not a exact figure in mind its really how it drives! and its come out great so if its a low number i'm not really bothered. its only running ~1bar of boost.

PostPosted: Tue Jan 27, 2009 11:07 pm
by jdm rsk
hey alex about time you came over to the serious yet fun subaru legacy/liberty forum

PostPosted: Wed Jan 28, 2009 8:20 am
by swingn
Me thinks there's now enough members down the Gong way to justify a cruise in the not too distant future :D

PostPosted: Wed Jan 28, 2009 8:36 am
by smythie
Roddez is trying to get a cruise going remember. The date most recently mentioned was the 22nd

http://forum.liberty.asn.au/viewtopic.php?t=4000