Page 1 of 1

2001 Twin Turbo Outback from Brisbane

PostPosted: Sun Oct 08, 2017 7:00 pm
by 01OBK
Hi guys
Just joined so thought I'd share my Twin Turbo swapped Outback. I bought it a little over a year ago as a bog standard Outback with 420,000ks, was only meant to be "get me to work and back" car when I broke my daily. But for some reason I kept it and started modifying it (wheels lowered springs etc). Then a few months ago I bought a 2000 model JDM Twin Turbo legacy half cut with complete driveline. Spent a few months pulling the engine from the half cut and "building" it. Then took a week off work and swapped it in to the Outback. Swapped in basically everything from the cut including A/C and heater boxes.

Has a few running issues to sort out (idles rough and feels like it keeps pulling timing out and cutting boost) but it runs and drives so that's the main thing I suppose.

Here's how it sits now

20170923_203853.jpg
20170923_203853.jpg (228.32 KiB) Viewed 2979 times


Mod list:
Jdm EJ206 and driveline swap
2.5in dumps into a 3in exhaust
Deatschwerks DW200 fuel pump
Sti 300km/h dash
Zero/Sports intercooler splitter
Zero/Sports tuned ecu ( not installed yet )
BC racing coilovers
WRX rear LSD
18x8.5 Rota G-force wheels
Jdm Legacy GT spoiler
Jdm HID headlights
Ultrex Wrx front lip
Ganador aero mirrors
Mishimoto aluminum radiator
Mishimoto trans cooler
Greddy front strut brace
Beatrush rear strut brace
Wrx front seats
Wrx brakes with DBA t3 front rotors and DBA t2 rears
Ebc red stuff brake pads

Cheers

Re: 2001 Twin Turbo Outback from Brisbane

PostPosted: Sun Oct 08, 2017 10:02 pm
by jslayz
Nice effort, looks good! 8)

Re: 2001 Twin Turbo Outback from Brisbane

PostPosted: Mon Oct 09, 2017 9:55 am
by craig_
That looks cool as heck!

Do you have any issues with the CVs by going that low or did you remove the subframe spacers?

Re: 2001 Twin Turbo Outback from Brisbane

PostPosted: Mon Oct 09, 2017 11:32 am
by 01OBK
craig_ wrote:That looks cool as heck!

Do you have any issues with the CVs by going that low or did you remove the subframe spacers?


Cheers mate
I removed the spacers from the front subframe during the swap. The rear subframe still has spacers but cv angles aren't that bad in the rear. Will get round to putting my Legacy rear subframe in one day once I've got all the supporting brackets