Page 1 of 1
Hello. gen4 Wagz
Posted:
Fri Mar 13, 2015 6:20 pmby bevomd
Gday guys and girls.
My names Bevan, Have been a Nissan person for pretty much all my life. Had an 02 Forrester a long time ago, but have always been in Nissans.
Today i picked up a Gen4 Spec B wagon
Thats about all i have to say for the moment. Eventually it will get some new wheels, and some cosmetic changes (maybe) but as for anything else the car will stay the same, as i feel there is no need to change it. Has been built very very well.
Name: Bevan, bevo, bev
Ride: as above, 99' Nissan Stagea
Location: Perth
Mod: see Coyote's thread
Plans: wheels
Occupation: FiFo
Previous Rides:
Nissan Skyline's
R31 x 10
HR31 x 2
R33
02' Forri
06' Maloo
99' Toyota Chaser
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Sat Mar 14, 2015 6:17 amby Tonic
Nice one Bevo....
Welcome ...
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Sat Mar 14, 2015 7:53 amby bigBADbenny
Brilliant, welcome back.
One of the best stock modded Libs here...
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Mon Mar 16, 2015 10:31 amby coyote
The old girl is still alive!
Please treat her nicely
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Mon Mar 16, 2015 11:50 amby bevomd
Top priority really. As i said, A very well sorted car. Just shy of 130k now, so it didn't travel too much after you sold it.
Plans are to get some nicer wheels, put in the factory sat nav i have sitting here, the Alcantara DAMD wheel and a brembo kit. Then just enjoy it
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Mon Mar 16, 2015 12:19 pmby bigBADbenny
Add a btSsm and a Tactrix for monitoring virtual gauges and you'll be set!
Alcantara DAMD is the PROVA, or the ProSpeed copy
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Mon Mar 16, 2015 1:45 pmby bevomd
Yeah, but mines a DAMD wheel, it was recovered by the previous owner, not sure why, maybe she liked alcantara better.
Also just found this while cleaning the car. (picture attached) assuming for the parrot BT? or something else, Coyote or anyone else feel free to enlighten me
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Mon Mar 16, 2015 7:53 pmby coyote
NFI mate. I can't even remember what I did last week.
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Tue Mar 17, 2015 1:32 amby bevomd
no worries, Shall trace it and see where it leads. Recent photo of it.
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Tue Mar 17, 2015 8:35 amby coyote
Still looks great.
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Thu Mar 19, 2015 7:57 amby kiahatsiu
It would look better on work XT7s.
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Thu Mar 19, 2015 8:18 amby coyote
kiahatsiu wrote:It would look better on work XT7s.
You know, I did start to type that
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Thu Mar 19, 2015 8:25 amby coyote
Re: Hello. gen4 Wagz (coyote's old rig)
Posted:
Fri Mar 20, 2015 10:35 amby bevomd
Looks pretty good with those. Am getting some wheel quotes at the moment from Jesse Streeter. Some OZ Formula or some Work MCO Racing Type CS.
I know you can get them locally, however over the years I have saved thousands on getting them shipped from Japan through Jesse. Shall see how it plays out
