Page 1 of 1

New member QLD

PostPosted: Fri Aug 16, 2013 3:18 pm
by wrxagz714
Hi folks. New addition to the Club Liberty family! :D

Name: Chucky

Ride: 07 Legacy Wagon 3.0BSpec 6MT
Location: Sunny QLD - Brisbane
Mod: All stock - although I'd like to upgrade the brakes, any suggestions??
Plans: Brakes...and I think the struts pretty soon.
Previous Rides: MY02 WRX 5MT WR Blue - boy do I miss that car... MY05 RS 2.5 5MT hatch, also a great little car.

Will get some pics up pronto!!
OK - pics are up... I need a couple more of the wagon. Also throwing up a pics of the old ride, great car... but the replacement has been sweet!!

IMG_3335.JPG
IMG_3335.JPG (199.63 KiB) Viewed 1147 times
IMG_1575.JPG
IMG_1575.JPG (169.8 KiB) Viewed 1145 times

Re: New member QLD

PostPosted: Fri Aug 16, 2013 3:44 pm
by swingn
Welcome :D

Re: New member QLD

PostPosted: Fri Aug 16, 2013 6:12 pm
by SMI77
Welcome Chucky.....another 'QUEENSLANDER'
What colour & rego, if we see each other on the road.
Our previous ride was the same spec. If you have the stock 10 spoke rims, you will be severely hampered in choice, as there is minimal distance between the stock caliper & the rim.

Re: New member QLD

PostPosted: Fri Aug 16, 2013 6:19 pm
by ferret89
Welcome mate! Always good to see a new QLD member

Keen for pics, what colour?
Best brake upgrade would be brembos, looking at at least $2k for a set though and may need to upgrade wheels as well.

Re: New member QLD

PostPosted: Fri Aug 16, 2013 6:22 pm
by zch91
Welcome mate, nice ride.

The next step up from the brakes you have on your car is Brembos which unfortunately won't fit under the stock wheels (as mentioned above).

A lot of guys argue that the brakes you currently have will out-perform the WRX 4pots you may be familiar with (294x24 4pot front 290x18 2pot rear)

Stock brakes: 316x30 2pots up front 290x18 1pot rear
Brembos: 326x30 4pot front 316x20 2pot rear

Other than that you'd be looking at other aftermarket brands like AP Racing, etc