Seagull = Neil

[seagull]

Hi people, dropping in here to say hello to all

Those that don't know me I reside at Maximum Motorsport in Perth and I am Work Shop Manager

I recently sold / swapped my GTB for a VH charger and currently have a MY 99 wrx
The build on the 99 as follows all built by me

EJ207 short, torque plate honed for STD bore
crank prepped
ACL race bearings
Spool H beam rods c/w arp 2000 rod bolts
Factory forge pistons
ARP head studs
Subaru factory head gaskets
Jun 264 c/w retainers / collars & HD valve springs, exhaust ports ported
My custom made cam gears
440 injectors
FRP fuel reg

Prodrive radiator

GTB spec B 6 speed c/w the addition of front LSD
3.54 R180 rear diff c/w plated STI LSD
R180 rear axels & hubs from spec C

Brembos all round

Pink STI rear lateral arms
S201 struts fitted with Selby H Low springs

Aluminum front A arms
White line sway bars front & rear c/w aluminum links

Process west surge tank c/w bosh motor sport fuel pump
AVCR boost controller
Apexi gauges

VF34 P18 turbo
3" turbo back MMS exhaust

17' x 7 ROH gun metal rims

[bigBADbenny]

Nice mods!!!

[cre8ive]

Hi Neil and welcome , Are you the chap I spoke to yesterday about my Gen 3 sensor at MMS ? You asked if I could bake a cake and if I had good legs

[zch91]

Welcome, nice car mate. Do you have any pics??

[seagull]

Hi Neil and welcome , Are you the chap I spoke to yesterday about my Gen 3 sensor at MMS ? You asked if I could bake a cake and if I had good legs

yes that is correct LOL

This is the location of the knock sensor, its a few posts down on the 1st page
There is a few numbers on it. They start on Ebay at $3.00


http://legacygt.com/forums/showthread.p ... 33e91&

[jslayz]

Welcome !

J