club.liberty.asn.au

Hi All,

I live done the South Coast in a lame little town called Merimbula. I picked up a 2004 MY04 Subaru Liberty 2.5i Safety. It is no Spec.B but I love it. Upgraded from a 1994 Mazda 323 Astina BA which I have destroyed cosmetically (I keep telling myself that it is okay since it is my first car =P). I will put up my 323 in the 'For Sale' as well.

Once I have enough money I would like to do the following upgrades.

1. HID Lights - High and Low
2. Rear Sway Bar w/ HD mounts
3. Due for new pads soon and was reading that Project MU are decent? Somebody care to elaborate about these?
4. LCA Bushes
5. XRT Tune
6. Reverse Light LED
7. Audio System.

What upgrades would you all recommend?

For my audio, I want to avoid a aftermarket single din headunit, spending $400 on a double din fascia and any permanent dash modifications or windscreen suction holders. I have come up with this idea.

1. This http://www.dashmount.co.uk/index.php/vmchk/Dashmount/Dashmount-Brackets/Subaru/Subaru-Legacy/Outback-200409.html
2. Then modify a case for my galaxy nexus and fit it to the bracket.
3. Samsung MHL Adaptor to DAC to Amps to Speakers.

Thoughts?

Source - Galaxy Nexus through MHL Adaptor to DAC
Fronts - Boston Acoustics PRO60se 6.5 Splits
Rear - Leave stock for now
Sub - Rockford Fosgate P3
Amps - undecided as of yet
DAC - undecided as of yet

And some eye candy below





Regards,

Brett

klunkeh wrote:Hi All,

Welcome! You're going to have a lot of fun here!

klunkeh wrote:1. HID Lights - High and Low

Jaycar (where I got my kit from) or hks180 can help you out here.

klunkeh wrote:2. Rear Sway Bar w/ HD mounts

Phat or vendors on places like Quicksales or eBay can help out. As for mounts, Phat or places like AVO can help you here.

klunkeh wrote:5. XRT Tune

PM Edward (west_minist). He's got a special running for Easter currently.

klunkeh wrote:6. Reverse Light LED

Again, hks180 or eBay can help out here.

klunkeh wrote:What upgrades would you all recommend?

If you like spirited driving, then swaybars and tune should be first on your list, for sure.

klunkeh wrote:For my audio, I want to avoid a aftermarket single din headunit, spending $400 on a double din fascia and any permanent dash modifications or windscreen suction holders. I have come up with this idea.

1. This http://www.dashmount.co.uk/index.php/vmchk/Dashmount/Dashmount-Brackets/Subaru/Subaru-Legacy/Outback-200409.html
2. Then modify a case for my galaxy nexus and fit it to the bracket.
3. Samsung MHL Adaptor to DAC to Amps to Speakers.

Neat idea! I'm personally going the whole hog and building a CarPC (out of PC components) as a long-term project.

Sounds like some interesting ideas. Have you actually heard the Boston components and the Rockford subs? FWIW for my $$$ they are heavily overrated and your money can be better spent elsewhere to achieve better results.

Welcome the South Coast is the place to be, i used to live there (not merimbula, but on the south coast)



hehe i love how HyRax always breaks things down!

Welcome! I played school soccer at merimbular once in some state cup, we dominated nice lib you got there

HyRax wrote:

klunkeh wrote:Hi All,

Welcome! You're going to have a lot of fun here!

Thanks I got mod fever before I got the car from reading this forum.

HyRax wrote:

klunkeh wrote:1. HID Lights - High and Low

Jaycar (where I got my kit from) or hks180 can help you out here.

I will go with hks180 since I want someone to install it for me.

HyRax wrote:

klunkeh wrote:2. Rear Sway Bar w/ HD mounts

Phat or vendors on places like Quicksales or eBay can help out. As for mounts, Phat or places like AVO can help you here.

Probably a cusco from phat.

HyRax wrote:

klunkeh wrote:5. XRT Tune

PM Edward (west_minist). He's got a special running for Easter currently.

I wish I could get this done but I am saving as much cash as I can for my trip to Asia. Once I get back I will be itching to get this done. Now just need a tactrix cable. Gonna go halfies with Farugah.

HyRax wrote:

klunkeh wrote:6. Reverse Light LED

Again, hks180 or eBay can help out here.

Going to do the same as with the HIDs and get hks180. Need the money first

HyRax wrote:

klunkeh wrote:What upgrades would you all recommend?

If you like spirited driving, then swaybars and tune should be first on your list, for sure.

I like the way you think The HIDs can wait because the lights are not that bad, major improvement from my 323.

HyRax wrote:

klunkeh wrote:For my audio, I want to avoid a aftermarket single din headunit, spending $400 on a double din fascia and any permanent dash modifications or windscreen suction holders. I have come up with this idea.

1. This http://www.dashmount.co.uk/index.php/vmchk/Dashmount/Dashmount-Brackets/Subaru/Subaru-Legacy/Outback-200409.html
2. Then modify a case for my galaxy nexus and fit it to the bracket.
3. Samsung MHL Adaptor to DAC to Amps to Speakers.

Neat idea! I'm personally going the whole hog and building a CarPC (out of PC components) as a long-term project.

I would love to go the whole CarPC route. I just find it hard to justify $400 for a double din fascia A screen would go nice I bet.

garbo41610 wrote:Sounds like some interesting ideas. Have you actually heard the Boston components and the Rockford subs? FWIW for my $$$ they are heavily overrated and your money can be better spent elsewhere to achieve better results.

I actually already own the Bostons (picked up for about $400 AUD) and Rockford (picked up for $112.50 in box). I love ebay! I am pretty happy with how they sounded in my old car...they were setup terribly. Like, really bad! lol.

SH30RB wrote:Welcome the South Coast is the place to be, i used to live there (not merimbula, but on the south coast)

hehe i love how HyRax always breaks things down!

Thanks I think the South Coast would be better kept as a holiday destination. Growing in small towns (used to live in Batemans Bay) is beggining to do my head in. I'll head to the big city one day . Until then, I will have to look like I belong to the city.

Glad HyRax broke it down. Gave me the chance to figure out how to break up the quotes and what not. I didn't want to do a messy post. Plus, easy to understand.

JKeep2.5i wrote:Welcome! I played school soccer at merimbular once in some state cup, we dominated nice lib you got there

Thanks I just hope I can keep it in good nick. Hopefully nobody on this forum will see what I did to my 323 poor baby. Never had a chance ha

klunkeh wrote:Thanks I just hope I can keep it in good nick. Hopefully nobody on this forum will see what I did to my 323 poor baby. Never had a chance ha

Oh I saw what you did to that 323, unspeakable things. Like the things I did to my Commodore, but hey thats what first cars are for

Hmmm, my pictures seem to be cut off at the right edge. I guess the pictures were too high resolution :/ Is there an ideal size for pics?

Farugah wrote:Oh I saw what you did to that 323, unspeakable things. Like the things I did to my Commodore, but hey thats what first cars are for

you stalker! First car, first car...that is exactly what I keep telling myself. Maybe I should not have photographed all the damage, who knows what would happen if those leaked.

i think its show and tell time haha!

You have twisted my arm Ill post some tomorrow when I get to work

SH30RB wrote:hehe i love how HyRax always breaks things down!

The nature of being an analyst...!

klunkeh wrote:I would love to go the whole CarPC route. I just find it hard to justify $400 for a double din fascia A screen would go nice I bet.

Yeah, that's the only part of the project that will prove to be really expensive, but it just looks so clean and slick - the project wouldn't be right without it. I've got a double-DIN touchscreen ready to go.

Still want to see how far you get with the Galaxy Nexus approach, though. There's lots of good software out there to make it work pretty well.

Here are some photos of my 323. Anybody wanna buy her?


Just a front on.


From driving over a dead kangaroo. I managed to get it back on looking okay but then when I had few people in the back, the bumper was sitting on a concrete parking things in parking spots, I drove off and it got almost pulled off


Rubbed up against a fence


Drove into a low lying brick wall. 3 or 4 bricks high. I used a hair dryer and popped it back out.


Hit a kangaroo. The globe is broken inside. It still works, just points to the sky.


Reversed into two separate letter boxes.


In an attempt to fix a rattle, I broke the whole housing and had to cut the light so it passed rego.

My 323 has had a hard life. Mechanically its perfect though lol

Hmmm... On second thoughts it may be prudent of you to invest in foam padding for the exterior of your Lib instead!

HyRax wrote:Yeah, that's the only part of the project that will prove to be really expensive, but it just looks so clean and slick - the project wouldn't be right without it. I've got a double-DIN touchscreen ready to go.

Still want to see how far you get with the Galaxy Nexus approach, though. There's lots of good software out there to make it work pretty well.

Ultimately I would like to do both. Start with the Nexus plan and then one day have a full CarPC. Is that screen you have resistive?

What kind of software are you referring to? For the Nexus plan?

HyRax wrote:Hmmm... On second thoughts it may be prudent of you to invest in foam padding for the exterior of your Lib instead!

I should just take all the panels off and preseve them till I am ready to sell Either that or trade for one of these.