Page 1 of 2

Introducing myself

PostPosted: Wed Oct 26, 2011 1:29 pm
by Farugah
Hi Guys,

Just got my 2005 Liberty 3.0RB 2 weeks ago and im in love :D previous rides were a 2000 RAV4 Cruiser and a 1994 5MT Commodore Wagon (Which I wrote off) as bogan as it was I loved the Commodore. I live on the Lower South Coast NSW.

No mods as of yet, but ive been in contact with PHAT GT about an STi front strut bar and ABS and Battery covers, just got my tax back so ill be ordering them very soon. Although also ill Post a few pics later but I think my Liberty has an aftermarket air intake, ill get someone to confirm if thats okay ;)

Planned Mods: Brakes, open to ideas but I want to keep it stock looking

Thats about it for now, if you have any questions just shoot ;)

Re: Introducing myself

PostPosted: Wed Oct 26, 2011 2:57 pm
by teflon
Welcome mate and nice choice of car.

In terms of the front strut bar, most people would agree that it is mostly engine bay bling and usually one of the last handling mods people do. I'm not sure of the cost on one of those things but if it is similar to the cost of a rear sway bar which you could also get through Phat then I'd highly recommend doing that first... it'll be a guaranteed noticeable difference (the stock rear sway bar is hollow and weighs hardly anything compared to an after market one).

Re: Introducing myself

PostPosted: Wed Oct 26, 2011 3:01 pm
by cruisn
Welcome. :D

Re: Introducing myself

PostPosted: Wed Oct 26, 2011 7:47 pm
by Smithyy
Welcome :)

Re: Introducing myself

PostPosted: Fri Oct 28, 2011 8:49 pm
by bert_
welcome bud!

Re: Introducing myself

PostPosted: Sat Oct 29, 2011 2:31 pm
by Farugah
teflon wrote:Welcome mate and nice choice of car.

In terms of the front strut bar, most people would agree that it is mostly engine bay bling and usually one of the last handling mods people do. I'm not sure of the cost on one of those things but if it is similar to the cost of a rear sway bar which you could also get through Phat then I'd highly recommend doing that first... it'll be a guaranteed noticeable difference (the stock rear sway bar is hollow and weighs hardly anything compared to an after market one).


Thanks Teflon, Ill take that into consideration, might hold off on the front strut bar. Any particular brands I should be looking at for the rear sway bar? Thanks for the welcomes guys :) I've learnt a lot from this forum already and theres stacks more to be learned.

Re: Introducing myself

PostPosted: Sat Oct 29, 2011 3:47 pm
by Rome_BRZ
I agree with Teflon regarding the strut bar, go rear sway bar instead. Get the cusco one :) Phat can hook you up with that too and can install it if you need

Re: Introducing myself

PostPosted: Sat Oct 29, 2011 5:54 pm
by teflon
As Jerome says you can either get the Cusco or Whiteline for the rear sway bar but whichever brand you decide make sure you get the heavy duty mounts (Cusco ones are about $80-$90, AVO I think are a bit dearer). The stock mounts are quite fragile.

Re: Introducing myself

PostPosted: Tue Nov 01, 2011 3:21 pm
by Farugah
Thanks heaps guys just shot an email to PHAT for a price on the rear sway bar for whiteline and cusco. There is a few other things I should probably do beofre going nuts with mods I need a new key as it only came with one and probably a new driver side mirror as the indicator light has been smashed out of it, New tyres are on the cards at some stage too.

Couple of pics below:

Image
Is this an aftermarket air intake?

Image

Image
You might be able to see the damage to the mirror here.

Re: Introducing myself

PostPosted: Tue Nov 01, 2011 5:19 pm
by JKeep2.5i
Welcome buddy, nice choice ! Should come on the south coast cruise happening I believe on the 18th of december
viewtopic.php?f=36&t=14005

Re: Introducing myself

PostPosted: Tue Nov 01, 2011 5:25 pm
by jdm rsk
Farugah wrote:Thanks heaps guys just shot an email to PHAT for a price on the rear sway bar for whiteline and cusco. There is a few other things I should probably do beofre going nuts with mods I need a new key as it only came with one and probably a new driver side mirror as the indicator light has been smashed out of it, New tyres are on the cards at some stage too.

Couple of pics below:

Image
Is this an aftermarket air intake?

You might be able to see the damage to the mirror here.


no its factory air intake

ooh and welcome

Re: Introducing myself

PostPosted: Wed Nov 02, 2011 8:20 am
by Farugah
jdm rsk wrote:
no its factory air intake

ooh and welcome


Cheers I've seen a couple of pics of the guys who are putting superchargers on and they dont seem to have this so i thought maybe it was aftermarket.

JKeep2.5i wrote:Welcome buddy, nice choice ! Should come on the south coast cruise happening I believe on the 18th of december
viewtopic.php?f=36&t=14005


Hey mate the problem is im 4 hours south of Nowra pretty much on the NSW/ VIC border

Re: Introducing myself

PostPosted: Wed Nov 02, 2011 10:25 am
by JKeep2.5i
then that actually is the south coast! I played soccer down there once at merimbula stayed at pambula caravan park :)

Re: Introducing myself

PostPosted: Wed Nov 02, 2011 10:29 am
by coyote
What are you doing modding the Liberty?

I thought you were saving up for a BRZ :wink:

Re: Introducing myself

PostPosted: Wed Nov 02, 2011 10:56 am
by Farugah
coyote wrote:What are you doing modding the Liberty?

I thought you were saving up for a BRZ :wink:


Ahh its you! My accident forced my hand and a Lib 3.0RB was the best I could do at short notice, so I put my 86 savings towards it. That said I will take an 86 for a test drive and if i like it more than the Lib ill trade up, but I seriously doubt that, I love this car so much.