New Member - New Liberty Owner!

[shav]

Yep yours is definitely a post FL Shav. No such thing as an 07 pre FL. The facelift occurred September 06.

So you consider this to be POST FL???


please PM me about it, as I am comfused and dont want to hijack this thread.

[Joshy]

Made a pic with the differences I can see:

[shav]

Made a pic with the differences I can see:

Thanks Josh. I was always under the impression the front bar was also different on the Post FL's too.

[Kody.B]

Looks great, very neat!
Do you plan on doing many mods?

Yeah its been taken care of, I am planning to do a few modifications, however I have no idea where to start haha.

Love the colour too, btw.

Thanks

I'd recommend starting with any suspension mods. So if you're going coilovers/lowered springs, do that first. Then wheels if you decide to change them. This way you can set your desired height and suit the wheels/guardwork to fit. Trust me on this, I did wheels first and when I get my coilovers in a few weeks I'm going to have to get my guards re-rolled or possibly add some camber. Mind you, the guardrolling thing wouldn't be an issue if the person had done it right in the first place...

Other than that, I don't think you really need a specific order. Make a list and slowly go through it.

[Joshy]

Cheers for the tips Kody, I will look in to them

[rooby]

Also the blinkers are in a different place on the mirrors in post fl and some interior like the centre console is different.

[Corsair]

Welcome Josh. If you're still looking for suggestions and haven't already found ways to spend your money, I'd go wheels first. Plenty of ideas here... viewtopic.php?f=19&t=5633

[Kormoran]

Cant forget music! If you plan to keep the stock headunit, have a look at http://www.cushieaudio.com.au/subaru-ipd3.html, one of my favourite mods so far

[Joshy]

I was thinking one of three options, either buy the kit you listed, or change the top bit (where you put your sunnies) in to a 2DIN slot and putting something in there, or taking out the stock unit and putting a 2DIN thing in there.