Hello. gen4 Wagz

by **bevomd** » Fri Mar 13, 2015 6:20 pm

Gday guys and girls.

My names Bevan, Have been a Nissan person for pretty much all my life. Had an 02 Forrester a long time ago, but have always been in Nissans.

Today i picked up a Gen4 Spec B wagon

Thats about all i have to say for the moment. Eventually it will get some new wheels, and some cosmetic changes (maybe) but as for anything else the car will stay the same, as i feel there is no need to change it. Has been built very very well.

Name: Bevan, bevo, bev
Ride: as above, 99' Nissan Stagea
Location: Perth
Mod: see Coyote's thread
Plans: wheels
Occupation: FiFo
Previous Rides:
Nissan Skyline's
R31 x 10
HR31 x 2
R33
02' Forri
06' Maloo
99' Toyota Chaser

by **Tonic** » Sat Mar 14, 2015 6:17 am

Nice one Bevo....
Welcome ...

by **bigBADbenny** » Sat Mar 14, 2015 7:53 am

Brilliant, welcome back.
One of the best stock modded Libs here...

by **coyote** » Mon Mar 16, 2015 10:31 am

The old girl is still alive!

Please treat her nicely :angel:

by **bevomd** » Mon Mar 16, 2015 11:50 am

Top priority really. As i said, A very well sorted car. Just shy of 130k now, so it didn't travel too much after you sold it.

Plans are to get some nicer wheels, put in the factory sat nav i have sitting here, the Alcantara DAMD wheel and a brembo kit. Then just enjoy it

by **bigBADbenny** » Mon Mar 16, 2015 12:19 pm

Add a btSsm and a Tactrix for monitoring virtual gauges and you'll be set!

Alcantara DAMD is the PROVA, or the ProSpeed copy

by **bevomd** » Mon Mar 16, 2015 1:45 pm

Yeah, but mines a DAMD wheel, it was recovered by the previous owner, not sure why, maybe she liked alcantara better.

Also just found this while cleaning the car. (picture attached) assuming for the parrot BT? or something else, Coyote or anyone else feel free to enlighten me

by **coyote** » Mon Mar 16, 2015 7:53 pm

NFI mate. I can't even remember what I did last week.

by **bevomd** » Tue Mar 17, 2015 1:32 am

no worries, Shall trace it and see where it leads. Recent photo of it.

by **coyote** » Tue Mar 17, 2015 8:35 am

Still looks great.

by **kiahatsiu** » Thu Mar 19, 2015 7:57 am

It would look better on work XT7s.

by **coyote** » Thu Mar 19, 2015 8:18 am

kiahatsiu wrote:It would look better on work XT7s.

You know, I did start to type that :lol:

by **coyote** » Thu Mar 19, 2015 8:25 am

https://dl.dropboxusercontent.com/u/6867790/coyote.jpg

by **bevomd** » Fri Mar 20, 2015 10:35 am

Looks pretty good with those. Am getting some wheel quotes at the moment from Jesse Streeter. Some OZ Formula or some Work MCO Racing Type CS.

I know you can get them locally, however over the years I have saved thousands on getting them shipped from Japan through Jesse. Shall see how it plays out

Hello. gen4 Wagz

Hello. gen4 Wagz

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Re: Hello. gen4 Wagz (coyote's old rig)

Who is online