H6 - Light weight crankshaft pulley

H6 - Light weight crankshaft pulley

Postby Tradewind » Wed Aug 07, 2013 8:46 pm

Possible new product - getting pushed from a couple of directions on this one

How about some light weight anodised crank pulleys similar to what the H4 crowd get


I have a attached an image of what other brands of lightweight pulleys look like - in the instance you have never seen one before.

Less mass on the crankshaft of the engine - more responsive/snappy




Anyone interested?
Attachments
Subaru pulleys.JPG
Subaru pulleys.JPG (40.23 KiB) Viewed 3388 times
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2025
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: H6 - Light weight crankshaft pulley

Postby jakey » Wed Aug 07, 2013 11:27 pm

is it more K/W in red?
-Jakey-UBARU
User avatar
jakey
 
Posts: 1083
Joined: Sun Jan 29, 2012 12:13 am
Location: Melbourne
Car: UBARU - 2005 MY06 3.0R
Real name: Jake
Profile URL: viewtopic.php?f=10&t=15489

Re: H6 - Light weight crankshaft pulley

Postby Adrian2627 » Thu Aug 08, 2013 10:35 am

Make sure it has degree marks on it Tim
Adrian2627
 
Posts: 1031
Joined: Mon Jan 07, 2008 6:11 pm
Location: Brisbane
Car: BP5F (MY09) Legacy 2.0 GT Spec B
Real name: Adrian

Re: H6 - Light weight crankshaft pulley

Postby Tradewind » Thu Aug 08, 2013 8:19 pm

Adrian2627 wrote:Make sure it has degree marks on it Tim


Adrian - yes we can do that

This sort of seems like a dumb question depending where your point of understanding is on matters such as this.

Why would you specifically want degree marks on a H6 crank pulley? I understand why they are critical on a H4 .......
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2025
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: H6 - Light weight crankshaft pulley

Postby Adrian2627 » Thu Aug 08, 2013 11:36 pm

Sorry mate missed the H6 bit in the title.
Adrian2627
 
Posts: 1031
Joined: Mon Jan 07, 2008 6:11 pm
Location: Brisbane
Car: BP5F (MY09) Legacy 2.0 GT Spec B
Real name: Adrian

Re: H6 - Light weight crankshaft pulley

Postby bates91 » Fri Aug 09, 2013 12:09 am

same thing that phat has brought in in the past...?

viewtopic.php?f=38&t=7887
User avatar
bates91
-stickered-
 
Posts: 1266
Joined: Wed Sep 22, 2010 11:02 pm
Location: Sydney
Car: BMW 135i
Real name: Edward
Profile URL: viewtopic.php?f=10&t=15799

Re: H6 - Light weight crankshaft pulley

Postby Tradewind » Fri Aug 09, 2013 6:18 am

bates91 wrote:same thing that phat has brought in in the past...?

viewtopic.php?f=38&t=7887



I didn't see or know that Phat had this item, have now contacted him and see what arrangement we can come to
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2025
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: H6 - Light weight crankshaft pulley

Postby Tradewind » Tue Aug 13, 2013 5:30 pm

It seems I will buy some stock from Garage 88 for a couple of overseas customers -


There is a story going around that the light weight pulleys from the BRZ will bolt right onto a H6 - I have not proven it myself. The only thing with the BRZ pulleys I understand they dont come with the nose cap
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2025
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: H6 - Light weight crankshaft pulley

Postby Tradewind » Mon Aug 19, 2013 6:44 pm

Have placed an information and price request with Garage 88

Will attempt to keep a couple in stock for the H6 people - none currently in AUS
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2025
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: H6 - Light weight crankshaft pulley

Postby Tradewind » Sat Sep 14, 2013 8:36 am

Have been in contact with G88 and certainly received a couple of replies from them but absolutely NO product to be seen anywhere yet.
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2025
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: H6 - Light weight crankshaft pulley

Postby Out6ack » Mon Mar 17, 2014 1:09 pm

Does anyone know of someone actually running one of these on an EZ30?
Do they just fit straight up cause grimspeed doesn't list the ez30 as an applicable engine. Dan from CarMods seems to think it wont be a problem & both AT & MT H6's would have a lot to gain from it. :D

Thoughts anyone??
User avatar
Out6ack
 
Posts: 191
Joined: Wed Jun 17, 2009 7:46 pm
Location: Newcastle
Car: 05 Outback 3.0 Premium.
Real name: Jay

Re: H6 - Light weight crankshaft pulley

Postby Tradewind » Fri Mar 21, 2014 9:06 pm

Garage 88 have the correct H6 item - they import it from Japan I believe

Chase them up on the matter and interested how you go
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2025
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: H6 - Light weight crankshaft pulley

Postby Tradewind » Sat Jun 14, 2014 7:53 am

Update on this

I came across this re lightweight pulley for H6 engines. I have no idea if they are compatible (diameter) with our supercharger kits

http://www.pleasureracing.com/newsite/e ... arts.html#
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2025
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: H6 - Light weight crankshaft pulley

Postby BUDDAH » Sat Jun 14, 2014 8:46 am

want to be a brave man to fit one :wink:
User avatar
BUDDAH
I've been banned
 
Posts: 3123
Joined: Sun Nov 05, 2006 9:02 pm
Location: Hakuba, Nagano, Japan 白馬村
Real name: [ bot ]

Re: H6 - Light weight crankshaft pulley

Postby Tradewind » Sat Jun 14, 2014 12:13 pm

You reckon? the factory thing is just a lump of metal, the aftermarket one is just a lighter lump of metal. MOST Subaru pulleys have no elastomer rubber or anything else like that for vibration damping, unless H6 is different.
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2025
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Next

Return to Raptor Superchargers

Who is online

Users browsing this forum: No registered users and 1 guest