Supercharger Systems -4GEN Liberty/Legacy

Re: Supercharger Systems - H6 Liberty and Legacy

Postby valadares » Fri Nov 30, 2012 7:58 am

after 1 month without my car,my waiting is finished.tomorrow we will make first ...

after that ( http://www.mototuneusa.com/break_in_secrets.htm ) i will put the 58mm pulley,and i will make new tune...

i would like to drive my SC'Bek-it was so lovely to drive it :mrgreen: ,cannot wait it.
valadares
 
Posts: 71
Joined: Sat Jun 23, 2012 1:49 am
Car: OUTBACK MY'08 H6 RAPTOR Subarcharged
Real name: vlad

Re: Supercharger Systems - H6 Liberty and Legacy

Postby Tradewind » Sat Dec 01, 2012 5:38 am

Vlad

Yes, that would be painful waiting and waiting. I am sure you will find some good performance again :)

Do you have a plan for obtaining a sure supply of quality fuel? I imagine it will be difficult in your region of the world
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Supercharger Systems - H6 Liberty and Legacy

Postby valadares » Sat Dec 01, 2012 7:38 am

back in the game :D

i cleaned the injectors,and start the engine ...like never stop it ,it is so cool to hear the wistle....
valadares
 
Posts: 71
Joined: Sat Jun 23, 2012 1:49 am
Car: OUTBACK MY'08 H6 RAPTOR Subarcharged
Real name: vlad

Re: Supercharger Systems - H6 Liberty and Legacy

Postby Tradewind » Sat Dec 01, 2012 8:49 am

valadares wrote:back in the game :D

i cleaned the injectors,and start the engine ...like never stop it ,it is so cool to hear the wistle....


I like :)
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Supercharger Systems - H6 Liberty and Legacy

Postby Tradewind » Tue Dec 04, 2012 7:28 pm

UPDATE - for non intercooled kits

From today the pressure side pipework for the non intercooled kits will be series of bends in silicon/alloy, individual air flow meter piece rather than the single pipe piece we have previously

The reason - so that should a customer decide to go INTERCOOLED they can use most of their existing parts and to get intercooled at a lower cost.



Today - Also finalised the brackets for the high flow Plazmaman coolers ........... should I decide to use them in the future
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Supercharger Systems - H6 Liberty and Legacy

Postby SH30RB » Mon Dec 10, 2012 6:44 am

I wonder if anyone has shown interest in the 11.5 psi intercooled kit :twisted:
It would be interesting to see the power gains made from that kit, raptor headers and an E85 tune...
One would expect around 260 awkw? Maybe more?
With that setup, you would almost have to go forged internals yes?
TEAM FUNERAL HEARSE!
Only slightly modified, I swear!
User avatar
SH30RB
-stickered-
 
Posts: 4024
Joined: Sun Aug 07, 2011 8:32 pm
Location: Sydney
Car: 05 Liberty 3.0R-B wagon
Real name: Simon
Profile URL: viewtopic.php?f=10&t=14766

Re: Supercharger Systems - H6 Liberty and Legacy

Postby 3rspecb » Tue Dec 11, 2012 7:57 am

WTA Cooler received. thanks Tim.

Will endoevour to have it fitted and tuned by xmas.
MY06 3rspecb manual sedan, Urban Grey- Shockworks Coilovers '- Gone

MY17 SSv Redline, manual sedan, White.
3rspecb
 
Posts: 1342
Joined: Mon Oct 09, 2006 10:59 pm
Location: Melbourne
Car: MY17 SSv Redline
Real name: G

Re: Supercharger Systems - H6 Liberty and Legacy

Postby Tradewind » Tue Dec 11, 2012 8:15 am

SH30RB wrote:I wonder if anyone has shown interest in the 11.5 psi intercooled kit :twisted:
It would be interesting to see the power gains made from that kit, raptor headers and an E85 tune...
One would expect around 260 awkw? Maybe more?
With that setup, you would almost have to go forged internals yes?



There is some talk locally of a twin screw arrangement, we have a spare twin screw laying around presently :twisted: Will be less top end power than a centrifugal system but huge low and mid power

With E85 you can do almost anything and 260atw with correct setup on stock internals would fit into the doable scenario I believe

Anyone with the coins to go a twin screw?? We can do it :mrgreen:
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Supercharger Systems - H6 Liberty and Legacy

Postby shav » Tue Dec 11, 2012 9:45 am

If you do it Tim, you gotta keep us posted with the progress. I can only imagine a 3RB doing 4 wheel skids at 3000rpm launches. :shock:
Cheers
Shav

MY07 Subaru Liberty GT Premium Sedan | HKS Panel filter | Pierburg 3 port | Whiteline adj sways F&R | Cusco HD mounts | Whiteline HD front sway links | Anycarlink AL-1080B | Ultrex s/s 3" CBE | Ultrex PU lip spoiler | Invidia s/s dump pipe and 100cel cat | KiDo tuned | DBA T2 rotors | Intima SS brake pads | Mishimoto TMIC | Koya ISR7 wheels | 265L Kobe fuel pump | Diamond Works SI Drive dial | Bilsteins

COSMETIC MODS ON THE WAY

My other toys:
2012 Focus Cayo 2.0 road bike
2015 Cervelo S5 VWD road bike
User avatar
shav
 
Posts: 3609
Joined: Tue Jun 26, 2012 12:01 pm
Location: Adelaide, Southern Suburbs
Car: MY07 Subaru Liberty GT Premium
Real name: Shav
Profile URL: viewtopic.php?f=10&t=18915&start=480

Re: Supercharger Systems - H6 Liberty and Legacy

Postby Tradewind » Sun Dec 23, 2012 7:32 pm

Merry Xmas to all, thanks for your support during 2012 and hope we can boost a few more Subaru's to greatness :D

Image


PS, we have another member of the supercharged H6 club in Brisbane now, non intercooled but getting started in same way many others have

G will add some pictures of his fresh IC install - with all the usual thoroughness you would expect
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Supercharger Systems - H6 Liberty and Legacy

Postby Gen5is » Mon Dec 24, 2012 11:26 am

Hey Tim, have you attempted any supercharger installs on MY10+ Libertys?
User avatar
Gen5is
 
Posts: 798
Joined: Tue Oct 02, 2012 2:00 pm
Location: Sydney
Car: MY12 Subaru Liberty 2.5i Wagon
Real name: Eric
Profile URL: viewtopic.php?f=10&t=22586

Re: Supercharger Systems - H6 Liberty and Legacy

Postby SegR » Mon Dec 24, 2012 12:09 pm

Sleigh needs more snail :-)
Team Beards
Beards Don't Kill People, People With Beards Kill People.
SegR
 
Posts: 1240
Joined: Sat Nov 20, 2010 9:11 am
Location: Brisbane
Car: MY05 3.0R sedan, black
Profile URL: viewtopic.php?f=10&t=14605

Re: Supercharger Systems - H6 Liberty and Legacy

Postby Tradewind » Mon Dec 24, 2012 1:55 pm

Gen5is wrote:Hey Tim, have you attempted any supercharger installs on MY10+ Libertys?



I haven't, however process is the same in every respect. KiDo could tune for you as does for others - no problem

If you want me properly scope it out for you - let me know and it will be done
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Supercharger Systems - H6 Liberty and Legacy

Postby Tradewind » Mon Dec 24, 2012 1:57 pm

SegR wrote:Sleigh needs more snail :-)



Seg it looks like its hauling pretty quick - will add another charger to it next year lol
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Supercharger Systems - H6 Liberty and Legacy

Postby 3rspecb » Mon Dec 24, 2012 1:59 pm

WTA finally fitted. I went with Tim's frozen boost WTA cooler over the larger plasmaman WTA cooler as I have a strut brace and it looked like the larger plasmaman WTA cooler would hit it.

I had to reposition the bov (thanks to Scotty's Customs and juzzy) as I have a brake booster support and it would of fouled against the BOV.

Happy to report that boost is 9psi at 7000rpm and that the cooler was cold to touch after long hard driving. Car felt very strong all the way. Was good to rev her out consistantly as for the last month or so have been babying her until the wta cooler was fitted.

All that's left to do is mount the water resorvoir properly (waiting on a bracket from my mate James) and also for my brother in law to properly wire up the water pump to accessories.

Its been a long time coming but am happy to finally get here, thanks to all that have helped along the way and big thanks to Tim from Raptor Superchargers..

Retune will be early jan, :wink:

Image
Uploaded with ImageShack.us
MY06 3rspecb manual sedan, Urban Grey- Shockworks Coilovers '- Gone

MY17 SSv Redline, manual sedan, White.
3rspecb
 
Posts: 1342
Joined: Mon Oct 09, 2006 10:59 pm
Location: Melbourne
Car: MY17 SSv Redline
Real name: G

PreviousNext

Return to Raptor Superchargers

Who is online

Users browsing this forum: No registered users and 3 guests