Page 3 of 3
Re: De lifted gen 4 outback
Posted:
Mon Mar 18, 2013 10:20 pm
by PaulLitespeed
some tidy lookin outbacks here...
does anyone know if it is possible to run-
18 x 7.5 +55 rims on a Gen-4 ?
how close will edge of rim be to gaurd edge?
cheers, Paul...
Re: De lifted gen 4 outback
Posted:
Mon Mar 18, 2013 10:23 pm
by jakey
On a gen-4 outback? I would've thought you'll shit that in with the wider guards....
Re: De lifted gen 4 outback
Posted:
Mon Mar 18, 2013 10:38 pm
by PaulLitespeed
I'm hoping so...
Car is at the smash repairers, an 83yr old man took my Mrs and baby out last week... a side swipe turning into a driveway at 80lm's/hr.
Girls are OK luckily...
Just unable to make measurements at the moment... working long days, repairer works short days.
Looking into my options for new rims...
Re: De lifted gen 4 outback
Posted:
Mon Mar 18, 2013 10:42 pm
by seanmau5
Mate, you should be going 8.5 +40ish
+55 is standard offset, 7.5" is only the STI Enkeis
Re: De lifted gen 4 outback
Posted:
Mon Mar 18, 2013 10:50 pm
by PaulLitespeed
+55 standard for Liberty...
I have a Gen-4 Outback 3L
+47 standard on 17 x 7's
Sti Enkei's are what I'm lookin at, yeh...
ever seen it done on an Outback Gen-4 ?
Re: De lifted gen 4 outback
Posted:
Mon Mar 18, 2013 10:58 pm
by seanmau5
Nah I haven't seen it but it'll be a piece of piss!
Re: De lifted gen 4 outback
Posted:
Tue Mar 19, 2013 12:06 am
by t.renshaw34
We are talking about what size you can fit under an outback guard yea???
Gen 4 lib you can go 18x8.5 +45ish before you poke.
Some people have done 18x9 but having to run 2-4degrees of camber to keep it inside. Not worth the $$$ on tyres.
I would have thought on a outback guard you could go 18x9 easy.
[quote="Drunkenmonkey"]Running bp turbo suspension in mine
What size rims are these^^^ still got a fair gap before its flush.
Re: De lifted gen 4 outback
Posted:
Tue Mar 19, 2013 3:04 am
by Mat04
I got 19x8 +40 on my outback now still an inch or so till I go flush
Re: De lifted gen 4 outback
Posted:
Mon Jun 01, 2015 3:23 pm
by Zig_Zac
Just had to, because it was amazing when I saw it on the HVC cruise on the weekend
https://flic.kr/p/sWk5RN
Re: De lifted gen 4 outback
Posted:
Mon Jun 08, 2015 11:29 pm
by lowndes8
I did mine but found the liberty GT springs far too bouncy so in the rear im going to fit the stock outback springs with the bilsteins to eliminate the bounce.
I may have to get a front spacer for the shocks so the cars sits even
Heres before i owned it
Heres how its sits now. Rear is lower than the front but once i fit the outback springs it should level out
Re: De lifted gen 4 outback
Posted:
Fri Jun 12, 2015 10:08 am
by Zig_Zac
Wow, wreckers asking for $600 for Billies shocks and springs off a GT Wagon.
Would there be much difference in ride harshness compared to stock Outback suspension?
Re: De lifted gen 4 outback
Posted:
Fri Jun 12, 2015 12:37 pm
by lowndes8
I have a set of bilsteins available if you are keen
I have found the ride fine except the rear if you dont have wagon springs (i was sent sedan ones bfore they sent the correct ones) the car will be bouncy over all bumps etc
Sedan springs have less coils and weigh less than wagon ones