club.liberty.asn.au

Dear all,

am looking at some GREAT deals on sat navs for only $799...instead of paying $3000+ for stock factory sat navs from Subaru. Does anyone know other than factory sat navs, that any other brands would possibly fit post-lifted GEN 4 liberties on dash?

give me some ideas guys,

much appreciated!!!

This is the current one i found in japanparts.com excluding the 7" monitor
for $286.77

Cheers,
Julzzy

Get a facia kit from Japan and get a double DIN headunit... that's what I've done. Removed the Mcintosh.

tangcla wrote:Get a facia kit from Japan and get a double DIN headunit... that's what I've done. Removed the Mcintosh.

i dun have macintosh...not as rich as you are mister lol...just normal sound unit for 2.5 NAs...what should i do?

The fascia kit fits non Macintosh as well...

teK-- wrote:The fascia kit fits non Macintosh as well...

how much all up?

THIS is probably what you need (linky!)



It's from Japanparts.com - list price is 30,800Y, which is.. erm... $371 odd AUD. (excl shipping).

Note there are a few options - I believe the 2.5i should need the black single aone (D / E / F) as pictured - however please verify yourself..

julzzychan wrote:i dun have macintosh...not as rich as you are mister lol...just normal sound unit for 2.5 NAs...what should i do?

I don't have a Mcintosh now either, removed it... using the facia kit.

Hobber wrote:THIS is probably what you need (linky!)



It's from Japanparts.com - list price is 30,800Y, which is.. erm... $371 odd AUD. (excl shipping).

Note there are a few options - I believe the 2.5i should need the black single aone (D / E / F) as pictured - however please verify yourself..

Argh thx John, thats correct model for the 2.5i for $371 with the sat nav thats really cheap? if its just the panel...thats really expensive

cheers anyway John

tangcla wrote:

julzzychan wrote:i dun have macintosh...not as rich as you are mister lol...just normal sound unit for 2.5 NAs...what should i do?

I don't have a Mcintosh now either, removed it... using the facia kit.

with sat nav and the lot you mean?

That $371 is just for the panel and HVAC controls

smythie wrote:That $371 is just for the panel and HVAC controls

so need to find the monitor somewhere else you mean?

tangcla wrote:Get a facia kit from Japan and get a double DIN headunit... that's what I've done. Removed the Mcintosh.

Also, find me a place so that they can fit for me please if you know anyone.

Cheers Bro

The panel is expensive because you are replacing the HVAC controls - on the 2.5i the HVAC and audio controls are all on one board... when you take the audio system out you need not only the new knobs and bit of plastic at the front for the HVAC, but the circuits behind as well.

julzzychan wrote:

tangcla wrote:Get a facia kit from Japan and get a double DIN headunit... that's what I've done. Removed the Mcintosh.

Also, find me a place so that they can fit for me please if you know anyone.

Cheers Bro

Julz, call these guys http://www.phattaudio.com.au/

and ask for Sam. Tell him you know Avon, he's a great guy, they do quality work for a great price and he's always happy to just share his knowledge

Hobber wrote:The panel is expensive because you are replacing the HVAC controls - on the 2.5i the HVAC and audio controls are all on one board... when you take the audio system out you need not only the new knobs and bit of plastic at the front for the HVAC, but the circuits behind as well.

Ah i see. thanks john, i will see what i can do the blokes i speak with and see the outcome of it. Sounds so complicated already

nytrojen wrote:
Julz, call these guys http://www.phattaudio.com.au/

and ask for Sam. Tell him you know Avon, he's a great guy, they do quality work for a great price and he's always happy to just share his knowledge

Thx Avon man. i will have a chat with Sam once i am off work cheers!

Replacing the panels with the ones from JDM is REALLY simple - don't worry about that bit!