Has anyone had their guards rolled/flared?

[stefan9155]

Hey guys, just wondering who's had their guards rolled or flared?
How much does it cost roughly? I'm also in Melb, so suggestions for where to go would be nice
Thanks

[tangcla]

Rolled, did it myself. Use a rubber mallet and just gently tap it out.

[swingn]

A few guys up here in Syd have had it done... Trick is not to crack the paint & even if you go to the best guy around, he will not be able to guarantee he won't crack the paint

Thus why I purposely went looking for rims that would work without rolling etc.

[Hotwire]

A few guys up here in Syd have had it done... Trick is not to crack the paint & even if you go to the best guy around, he will not be able to guarantee he won't crack the paint

Thus why I purposely went looking for rims that would work without rolling etc.

Here in Adelaide there is a shop "Wheelworx" that guarantee not to crack your paint if its factory paint (i.e. not re-sprayed). I guess his guarantee is that if he cracks it, he'll pay for re-spray?! Anyway, he rolled the guards on my Legnum VR4 and they were perfect, no cracks Cost me $60 per corner (had the 2 rears rolled).

I have also rolled using the rubber mallet method on another car, and wouldn't do it that way again. Much better off paying the $60 per corner for another person to do it.

Sorry I can't help with any Melbourne-ites to do it.

[stefan9155]

Thanks for the info guys, I was expecting it to be much more expensive, like over $500 lol. I'll get that done and lower it with some teins or eibachs and post some pics up during this summer