Page 1 of 1
Dog Leg Plastic Bits
Posted:
Wed Jun 24, 2009 5:04 pmby BlackFlatSix05
Thinking about getting my plastic bits that fill in the bit between the back door and the wheel arch painted as mine are stone chipped.
Has anyone pulled these off ? Do they just unclip ?
Re: Dog Leg Plastic Bits
Posted:
Wed Jun 24, 2009 7:43 pmby teK--
is this the bit?
Re: Dog Leg Plastic Bits
Posted:
Wed Jun 24, 2009 7:47 pmby teK--
You'll need to take these off first...
Re: Dog Leg Plastic Bits
Posted:
Wed Jun 24, 2009 7:48 pmby Sentinel
teK-- wrote:is this the bit?
Hey TeK - bit off topic, but can you please PM where you get that sort of info from.
Cheers
Re: Dog Leg Plastic Bits
Posted:
Wed Jun 24, 2009 7:52 pmby teK--
Workshop manual
. I have the MY04 AUDM one but most of the body stuff would probably still apply for your later models.
Re: Dog Leg Plastic Bits
Posted:
Wed Jun 24, 2009 7:58 pmby WhiteGTB
teK-- wrote:Workshop manual
. I have the MY04 AUDM one but most of the body stuff would probably still apply for your later models.
I had one but it got lost some how...
Would it be too much trouble to burn and send it up to Sydney? I'd cover all charges
Re: Dog Leg Plastic Bits
Posted:
Wed Jun 24, 2009 8:03 pmby BlackFlatSix05
Yes that's precisely the bits I'm referring to. So, from the diagram it looks like they just snap out after removing the sills ?
LEGENDS!!!!! thanks very much.
Re: Dog Leg Plastic Bits
Posted:
Wed Jun 24, 2009 8:04 pmby Sentinel
WhiteGTB wrote:teK-- wrote:Workshop manual
. I have the MY04 AUDM one but most of the body stuff would probably still apply for your later models.
I had one but it got lost some how...
Would it be too much trouble to burn and send it up to Sydney? I'd cover all charges
+1 but send another down south to Melbourne??
Re: Dog Leg Plastic Bits
Posted:
Wed Jun 24, 2009 8:15 pmby teK--
yeah looks like they just snap off; perhaps use a screwdriver covered with cotton towel as leverage to pop the clips off.
Re: Dog Leg Plastic Bits
Posted:
Sat Jul 04, 2009 7:15 pmby WhiteGTB
Thank you Tek, you are a champ!
Re: Dog Leg Plastic Bits
Posted:
Sun Jul 05, 2009 4:50 pmby drndrn
Trieu and Steve,
http://www.tangcla.com/temp/bl5/referen ... %20Legacy/There you go fellas, Clarence has them up on his website.
Re: Dog Leg Plastic Bits
Posted:
Mon Jul 06, 2009 6:21 amby WhiteGTB
Thank Darren, didn't need to go to this site, Tek supplied the whole manual!
Re: Dog Leg Plastic Bits
Posted:
Mon Jul 06, 2009 12:13 pmby GTB Liberty
Sentinel wrote:WhiteGTB wrote:teK-- wrote:Workshop manual
. I have the MY04 AUDM one but most of the body stuff would probably still apply for your later models.
I had one but it got lost some how...
Would it be too much trouble to burn and send it up to Sydney? I'd cover all charges
+1 but send another down south to Melbourne??
Anyone have the MY08 appropriate manual with the 2.5 turbo info?