club.liberty.asn.au

Posted: **Sat Jan 10, 2009 10:59 am**

ok guys.. im biting the bullet and scoping ebay for HID's

whats the Bulb type for an MY05:

Lowbeam: ??
Highbeam: ??
Driving lights: ??

thanking you for your help guys

Posted: **Sat Jan 10, 2009 12:37 pm**

I'm sure Leo could help you out on that.. he is our HID King.. but I'm sure the others can as well.. they most likely got them installed off him

Posted: **Sat Jan 10, 2009 12:47 pm**

Lowbeam: H7
Highbeam: HB3
Foglights: H3 (H11 for MY07+)

I can get you HIDs if you're interested, $165 a set delivered with 18mth warranty. Local Australian warranty, too, not dodgy overseas crap.

Posted: **Sat Jan 10, 2009 1:46 pm**

be the best money youve spent on the car tony, not like those mufflers.. ha ha ha

Posted: **Sat Jan 10, 2009 2:11 pm**

Actually for the AUS MY07+:

HID equipped Libertys:
Lowbeam - D2S
Highbeam - HB3
Foglights - HB4/9006

Non-HID equipped Libertys:
Lowbean - H7
Highbeam - H9
Foglights - HB4/9006

Posted: **Sat Jan 10, 2009 2:56 pm**

Arith wrote:Actually for the AUS MY07+:

Oh okay... H9 and H11 are interchangeable, I think H11 has the ceramic endcap whereas the H11 doesn't (or vice versa).

Same sort of deal with HB3/HB4 - are you sure the factory Xenon ones would use HB4 for highbeams? As HB4 has ceramic endcaps on the end of it, thus defeating the purpose of the highbeam.

Posted: **Sat Jan 10, 2009 3:28 pm**

tangcla wrote:H9 and H11 are interchangeable

Pretty much. There's just a notch difference between the two. But conversion should be relatively easy.

I think H11 has the ceramic endcap whereas the H11 doesn't (or vice versa).

I think you meant the H9 for the 2nd one? But yeah, H11 has the cap and is used for foglights in some cars.

Same sort of deal with HB3/HB4 - are you sure the factory Xenon ones would use HB4 for highbeams?

No, which is why my post (and the car manual) says HB3. HB4 is for the foggies.

Posted: **Sat Jan 10, 2009 3:31 pm**

gah, misread. Skimreading numbers is a bad thing.

my bad!

Posted: **Sat Jan 10, 2009 3:41 pm**

I mucked up too.

I had the numbers switched around (HB3 highbeams for HID equipped Libs not the other way around). All fixed now.

Posted: **Sat Jan 10, 2009 4:02 pm**

Arith wrote:I mucked up too. I had the numbers switched around (HB3 highbeams for HID equipped Libs not the other way around). All fixed now.

ahh, that makes more sense. Double badness

Posted: **Sat Jan 10, 2009 4:06 pm**

I pity da fool who actually takes our advice. :biggrin:

Posted: **Sat Jan 10, 2009 10:26 pm**

I have a 03 Liberty GT and aI m also interested in putting in HIDs. Will they be as good as those original bi-xenon lights in OEM cars?

Where can I get them fitted in Melbourne?

Posted: **Mon Jan 12, 2009 8:13 am**

marckhor wrote:I have a 03 Liberty GT and aI m also interested in putting in HIDs. Will they be as good as those original bi-xenon lights in OEM cars?

Where can I get them fitted in Melbourne?

03 liberty isnt that a BE shape? if yes i have a factory set of hid's headlights...shane

Posted: **Mon Jan 12, 2009 8:57 am**

legacy rsk wrote:
marckhor wrote:I have a 03 Liberty GT and aI m also interested in putting in HIDs. Will they be as good as those original bi-xenon lights in OEM cars?

Where can I get them fitted in Melbourne?
03 liberty isnt that a BE shape? if yes i have a factory set of hid's headlights...shane

My Gen4 GT wagon was built in September 03 ,but its a MY04.

Im interested in these HIDs . Is it $165 all up or for each side.

Posted: **Mon Jan 12, 2009 9:02 am**

Shane's is a Gen 3. Lights won't fit your Gen4

club.liberty.asn.au

Headlight Help

Headlight Help