club.liberty.asn.au

Hi all,

Please help.
My aircon refrigerant ran out and then I had it regassed and had the dye and new o-rings and then it ran out again with 24 hours.

When the air con technician looked for a leak under UV, he said there was no evidence of a leak but no pressure so they changed the valve on the low side and regassed and sure enough, empty within 24 hours.

They said its more than likely the evaporator. Rather than spend close to $1800 in labour (they said 12 hour job) I figured I could replace the evaporator.

I have dived into this previously in my 2004 GT 2.0L

Is this similar/do they share the same assembly?

Do you need to remove the hvac accessories + blower?

If the blower is removed theres a black box surrounding the evaporator but unsure how to remove/unclip.

If anyone can help please do...as you can imagine its much hotter and its not even summer!

Thanks all in advance 

Pre facelift and Post Face Lift BL/BP Liberty evaporators are (slightly) different sizes.

BEWARE

Better look for the correct one!

Thanks BillyCorgi.

They are both pre-face lift.

That being said, do you have any tips on removing the evaporator or any guides on how to remove without ripping the dash apart?

Is there something I should find and replace while im there etc.

Thanks again!