how to clear engine light indicators

Ask for help with doing something on your car here.

how to clear engine light indicators

Postby Rawinc » Mon Aug 16, 2021 2:39 am

hi there
installed a process west cold air intake on my 2009 liberty 2.5 NA, when i connect the sensor to it my air intake it doesnt start so i unplugged it and the turns on, is there anyway i can by pass this through flashing it?
am not familiar with flashing and software manipulation
Rawinc
 
Posts: 3
Joined: Tue Jul 27, 2021 5:53 pm
Car: subaru liberty 2.5i

Re: how to clear engine light indicators

Postby bigBADbenny » Mon Aug 16, 2021 10:19 am

Absolutely but not.
Pulling the maf loom plug causes limp mode on maf tuned cars.

You’ll probably require a tune to run the cai efficiently, or maybe at all.

I’d return it all to stock whilst you look into your tune options.

You can use a battery reset or obdii plug to reset the codes.
User avatar
bigBADbenny
 
Posts: 10420
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop


Return to How do I?

Who is online

Users browsing this forum: No registered users and 7 guests