Hello all,
I have noticed that when I'm using the heater in my 05 lib the drivers side gets hot as, but the passenger side only ever blows cold.
Not sure where to start looking - thought one of the mode or air-mix actuators, or maybe when I replaced the coolant I've got an air block in heater core. I also used some 'instant head gasket fix' so maybe that's the cause...
I just read the air bleeding forum for the 3L's and found out about the second thermostat from the head - and thought maybe because I only replaced the bottom thermostat that might be messing with it.
Any insight would help tremendously.
Cheers,
Angus