Gen 2 Liberty RX/ EJ205 swap

Ask for help with doing something on your car here.

Gen 2 Liberty RX/ EJ205 swap

Postby Chris750 » Tue May 09, 2017 9:01 pm

Hi everyone,
I've been plugging along with an EJ205 (from an MY00 WRX) swap on my Gen 2 Liberty rx Wagon. Im at the point of splicing the wiring harness, and it's definitely not as straight forward as I was led to believe. At this stage I've got the WRX engine management and ECU part of the harness separated from the loom, 18 cut wires that lead from the ECU connectors to the drivers side of the loom, and wires coming from the OBD port. Finding out what these wires are from the WRX harness isn't a problem, it's where they are on the Liberty harness thats the hard part. My intention is to keep all my body managemant and accessories (A/C, lights, windows, cluster, airbags) stock on the Liberty, porvided thats possible.

Anyway, long story longer, where do I go from here? I have the WRX ECU pinout, but can't find the pinout for the AUDM Liberty. Is there a Legacy that has the same ECU pinout?

I'd appreciate any help, even if it comes to paying someone to do it...

Cheers guys!!!!
Posts: 3
Joined: Sun Mar 01, 2015 4:11 pm

Return to How do I?

Who is online

Users browsing this forum: No registered users and 4 guests