I'm located Brisbane, QLD, Australia. I bought a '04 Liberty GT (2.0T) 5EAT as a project car from Mackay and drove it home. On the way home the turbo compressor seized in the housing and luckily I didnt loose any oil/water and basically just ended up driving home off-boost with a big lump in the mainfold. Shit happens, I paid less than 5k and the car has a few mods already which paid off the cost of the car. The interior is excellent which is always a bonus. Came with the typical airbag light and the centre dash clock not working.
Tomei Extractors / Dump Pipe(Titanium) / Custom 3" Exhaust
Tomei ARMS M8265 Turbo(which I'll sell off)
ProcessWest TMIC (which I'll sell off)
Turbosmart Manual Boost Tee
Some ricer BOV (Expensive, but I dont like it)
Wheels/Suspension
Koyo Radiator
Aftermarket Tranny Cooler
Before I bought it I put in a 4T 2 Post Hoist for the build(and just generally, I live on 2 acres and I'm always working on projects) so I've been dismantling the engine and looking over the various bits and pieces that I need to do to get around the 400WHP mark. Not a daily driver, a project car. No timeframe yet.
I have oxy/acet gear, MIG, TIG(AC/DC), Stick and I can weld where I need to but I do usually favour buy over build if possible.
It would be good if anybody could point me to a summary thread/information post where I could try and determine which STi/WRX parts "fit" the LGT 2.0T motor. I've always made a blinding assumption that generally WRX parts will fit and STi parts may not always fit due to things like manifold differences and twin-scroll turbos but I could be wrong. Any information that you could provide (or links) would be much appreciated. In terms of tuning I've always favored the Tactrix OpenPort for data logging and reflashing but happy to be schooled here too.
Regards,
Matt