Page 1 of 1

Liberty GT steering wheel compatibility?

PostPosted: Tue Feb 07, 2017 1:35 pm
by liparus
Hola,

I have a 2008 Liberty GT with a damaged steering wheel.
Even if I have both VINs, Subaru or anyone for that matter cannot tell me what wheels are compatible.
I'm not fussy and just want an undamaged wheel.
Surely the same shaped wheel across 4th gens is not too difficult a swap?
Was hoping someone out there knows :)

Re: Liberty GT steering wheel compatibility?

PostPosted: Tue Feb 07, 2017 4:06 pm
by Surge
I would try to stay within post facelift, other than that I don't see how it wouldn't fit.

Do you have a link for the wheel you're buying?

Re: Liberty GT steering wheel compatibility?

PostPosted: Wed Feb 08, 2017 10:53 am
by fedaykin
Well following DAMD's site, looks like 'A-C' models are different to 'D onwards'
http://www.damd.co.jp/products/subaru/legacy_bl/
I'm guessing 'D' is post facelift?

Re: Liberty GT steering wheel compatibility?

PostPosted: Wed Feb 08, 2017 5:30 pm
by Adrian2627
fedaykin wrote:Well following DAMD's site, looks like 'A-C' models are different to 'D onwards'
http://www.damd.co.jp/products/subaru/legacy_bl/
I'm guessing 'D' is post facelift?


That's correct A-C Prefacelift, D-F Postfacelift. In Japan it's what's know as the Applied Code which can be found on your VIN Plate and bill look something like BP5AXX for a prefacelift wagon. A postfacelift sedan will be BL9DXX. The P & L are wagon and sedan respectively and the 5 is the 2.0 and 9 the 2.5. A 3.0 will have an E in place of the 5 or 9. Don't get the Applied Code mixed up with the VIN as they both start with the BP5 etc desigination for the vehicle but the letter following is often different.

Re: Liberty GT steering wheel compatibility?

PostPosted: Fri Feb 10, 2017 4:14 pm
by Gtb08
I PMd Liparus this but thought to share -

I bought this leather cover from Ebay and stitched it on myself - no need to remove steering wheel(or controls). Just a little patience and a coupla brews to get it done. For around $60 delivered. give the wheel a nice thicker sports wheel feel, and matches the GTB leather seats perfectly.

Re: Liberty GT steering wheel compatibility?

PostPosted: Fri Feb 10, 2017 5:41 pm
by Adrian2627
Looks good mate. Much cheaper than a new wheel and you get the satisfaction of doing it yourself...and a reason to enjoy some brews.

Re: Liberty GT steering wheel compatibility?

PostPosted: Tue Sep 04, 2018 9:30 pm
by Vontisch
Gtb08 wrote:I PMd Liparus this but thought to share -

I bought this leather cover from Ebay and stitched it on myself - no need to remove steering wheel(or controls). Just a little patience and a coupla brews to get it done. For around $60 delivered. give the wheel a nice thicker sports wheel feel, and matches the GTB leather seats perfectly.


Can you remember the company you bought this from?