Gen 4 bumper removal

Ask for help with doing something on your car here.

Gen 4 bumper removal

Postby 2008Liberty » Tue Oct 13, 2015 1:22 pm

Hey fellow lib owners!!
Looking at removing my headlights this weekend to get Leo to install some Halos for me...
I have heard you need to remove the front bumper in order to get them out? Is the correct? And if so has anyone got a quick run down on how to remove it?

Any help would be greatly appreciated!!
Regards
Scott
2008Liberty
 
Posts: 47
Joined: Tue Nov 15, 2011 5:24 pm
Car: 2008 satin white 2.5i sedan
Real name: Scott

Re: Gen 4 bumper removal

Postby BillyCorgi » Tue Oct 13, 2015 4:39 pm

Words from the Factory Service Manual.....
11.Headlight Assembly
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the air intake duct. (When removing the
headlight RH).
3) Remove the front bumper. <Ref. to EI-30, REMOVAL,
Front Bumper.>
4) Disconnect harness connectors.
5) Remove the 7 bolts, disengage 1 clip, then detach
the headlight assembly.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)


Seems the instruction is to remove the front bumper.
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1804
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: Gen 4 bumper removal

Postby 2008Liberty » Tue Oct 13, 2015 5:01 pm

BillyCorgi wrote:Words from the Factory Service Manual.....
11.Headlight Assembly
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the air intake duct. (When removing the
headlight RH).
3) Remove the front bumper. <Ref. to EI-30, REMOVAL,
Front Bumper.>
4) Disconnect harness connectors.
5) Remove the 7 bolts, disengage 1 clip, then detach
the headlight assembly.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)


Seems the instruction is to remove the front bumper.


Do you have the information from the factory manual on how to remove bumper?
2008Liberty
 
Posts: 47
Joined: Tue Nov 15, 2011 5:24 pm
Car: 2008 satin white 2.5i sedan
Real name: Scott

Re: Gen 4 bumper removal

Postby BillyCorgi » Tue Oct 13, 2015 8:27 pm

2008Liberty wrote:Do you have the information from the factory manual on how to remove bumper?

http://imgur.com/a/HUXVj
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1804
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx


Return to How do I?

Who is online

Users browsing this forum: No registered users and 3 guests