6MT Centre Differential Rebuild Project

Ask for help with doing something on your car here.

Re: 6MT Centre Differential Rebuild Project

Postby Brunsy3.0 » Sat Aug 13, 2016 8:45 pm

Geez, what a mess
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: 6MT Centre Differential Rebuild Project

Postby BillyCorgi » Sun Aug 14, 2016 12:43 am

Rebuilt a 5MT Centre Differential today.
Miss Sally led the duties with the QA inspection of the Fiction Clutch Discs.

Image free screenshot software

Image picture upload sites

Image free image host
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1579
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: 6MT Centre Differential Rebuild Project

Postby Pylon 500 » Mon Aug 22, 2016 9:22 pm

May I say that I have never (never, ever, ever) seen a Centre Differential Viscous Coupling like this.

WOW, That is horrendous!!
He must have been driving only on dirt roads, and probably thought they were rougher than they really were!
Watching your work with interest...
Since running with axle height instead of pressure, I'm not getting much binding, although the other day I dragged a box trailer with a 300kg compressor in it for about 40km, and I had a good thumping from underneath by the time I got home.
All good the next day after cooling down, and no trailer.
My MY04 3.0r Bspec 6mt wagon now has 168k on it, so I'm keeping an eye on your site, but I must say I'm not looking forward to doing gearbox work again.
I did a swap and rebuild of the 4eat tranny in my SVX, but it took around three weeks to get done, and really don't want to go there again....
I'll keep reading about pulling the rear of the box off till I feel I can do it in a couple of days, just got so many things on at the moment.
Glad I retired a few years back, damned if I could find time to work now!!
1980 L Series
1990 L Series
1992 SVX
2004 B spec R 3.0l 6MT Wagon
User avatar
Pylon 500
 
Posts: 6
Joined: Sat Dec 19, 2015 12:27 pm
Location: Taree NSW
Car: 2004 3.0 BspecR wagon
Real name: Arthur
Profile URL: https://picasaweb.google.com/113292981019876413104

Re: 6MT Centre Differential Rebuild Project

Postby fedaykin » Tue Aug 23, 2016 5:12 pm

Animal testing is unethical :P
fedaykin
 
Posts: 574
Joined: Wed Apr 08, 2015 10:09 am
Location: Sydney
Car: MY10 GT Wagon 6MT

Re: 6MT Centre Differential Rebuild Project

Postby BMCracer » Mon Jul 03, 2017 5:25 pm

Late to the party as usual, but........... Have you had any experience with 5eat units from a 3 litre Spec B? Description of what mine is doing here

viewtopic.php?f=2&t=34809

Would be interested, and grateful, for your insight Mr BillyCorgi.

Edit - on the plate on the left hand front strut top, the transmission code is TG5C7CVDBA, whatever that means :?
BMCracer
 
Posts: 28
Joined: Thu May 11, 2017 10:01 am
Location: Land of the Long White Cloud
Car: NZDM MY07 3.0R Spec B 5eat Wgn
Real name: Andrew

Re: 6MT Centre Differential Rebuild Project

Postby BillyCorgi » Mon Jul 03, 2017 6:40 pm

BMCracer wrote:Late to the party as usual, but........... Have you had any experience with 5eat units from a 3 litre Spec B? Description of what mine is doing here

viewtopic.php?f=2&t=34809

Would be interested, and grateful, for your insight Mr BillyCorgi.

Edit - on the plate on the left hand front strut top, the transmission code is TG5C7CVDBA, whatever that means :?


Responded to your post in the mentioned thread. Cheers!
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1579
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: 6MT Centre Differential Rebuild Project

Postby Zachius » Sun Jul 15, 2018 9:55 pm

Are you still doing this? My 6MT in my 07 3.0RB needs a rebuilt centre diff.

It has had symptoms for a while (after a highway drive slow turns go clunk clunk).

What cost am I looking at for exchange (with getting the rebuilt one first, will need a couple of weeks to change it over). Am in Newcastle if that makes a difference.

Will probably be needing to do this in the next month or two as something in the gearbox output/diffs has developed a serious whine :-(
Zachius
 
Posts: 13
Joined: Sun May 24, 2009 5:18 pm
Car: 2008 Liberty 3.0RB H6

Re: 6MT Centre Differential Rebuild Project

Postby BillyCorgi » Sat Jul 28, 2018 3:06 pm

Zachius wrote:Are you still doing this? My 6MT in my 07 3.0RB needs a rebuilt centre diff.

It has had symptoms for a while (after a highway drive slow turns go clunk clunk).

What cost am I looking at for exchange (with getting the rebuilt one first, will need a couple of weeks to change it over). Am in Newcastle if that makes a difference.

Will probably be needing to do this in the next month or two as something in the gearbox output/diffs has developed a serious whine :-(


PM sent on 18th July.
As yet no response.
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1579
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: 6MT Centre Differential Rebuild Project

Postby BillyCorgi » Fri Sep 21, 2018 5:39 pm

We have not posted for a few months, so here are some updates…….

We have been building 4kg diffs and have also built some higher torque setting differentials.
To do that, higher viscosity siloxane fluid has been sourced from overseas manufacturers, that are used straight or blended with the 4kg fluid to get diff settings between the two extremes.

Every diff that we obtain is stripped and cleaned, and then after cleaning is dry assembled to measure the key parameters of the differential.
From this statistic, we have established what is the “normal” factory clearances for the gearset and what is the “normal” factory clearances for the viscous clutch plates.
All centre diffs are individually “adjusted” or “tuned” to these key measurements when reassembled.
When required, some components will be machined to set the internal clutch plate clearances back to the statistical “sweet-spot”.
All units have the thrust washers adjusted to produce the desired clearances within the differential gearset.

Our processes have been refined to achieve a smooth reassembly that guarantees a consistent and repeatable outcome.
The measurements taken and the adjustments made allows us to know that the centre diff will reassemble correctly.
During reassembly, special tooling is employed to ensure that the differential gearset clearances are maintained.

During reassembly, the diffs can suffer from what we refer to as "hydraulic-lock" where the viscous fluid is prevented from escaping when sealing the lid and the hydraulic forces cause the side gear to close up the clearances in the differential gearset. We have perfected the assembly of the viscous clutch plates to mitigate the action of "hydraulic-lock" during seal-up, to ensure correct gearset clearances are maintained.

When completed, the centre differential should turn with a firm, but smoooth buttery feel, without any kick-back from the meshing of the diferential gears.

CorgiWerx - The Subaru Centre Differential Subject Matter Experts
Last edited by BillyCorgi on Fri Sep 21, 2018 8:19 pm, edited 1 time in total.
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1579
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: 6MT Centre Differential Rebuild Project

Postby tom_kauf » Fri Sep 21, 2018 7:28 pm

Sounds great Billy - better than ever 8)
[Stealth & Speed - Comfort & Practicality]: My 2008 MY09 GT SpecB Wagon - Manual 185,000km
User avatar
tom_kauf
-stickered-
 
Posts: 1338
Joined: Thu Sep 26, 2013 1:05 pm
Location: Brisbane, QLD
Car: 2008 Liberty GT SpecB Manual Wagon
Real name: Tom

Previous

Return to How do I?

Who is online

Users browsing this forum: No registered users and 2 guests

cron