club.liberty.asn.au

Hey all.
Was wondering if anyone had any ideas on hot to get spec b metal pedals to go on properly. They are a rubber back and slide on from the bottom but they have a rubber lip at the top that is supposed to clip over the top of the pedal so they don't slide back down and I cant get it to go over the top of the pedal. I know its a little thing but I can feel a small amount of give when I push the brake pedal and its annoying me.
I've got a picture of the lip I am talking about and I will put it up asap.
Thanks

The lip is the bit at the right

Bit of soap or some other kind of lube and they should slip over. If that doesn't work, use a screwdriver.

DownUnder wrote:Bit of soap or some other kind of lube and they should slip over. If that doesn't work, use a screwdriver.

Or even better, a plastic trim remover or similar so you don't gouge it!

Yeah def a pain to fit. I used plastic trim remover after failing for a while. Was still a pain

KY Gel

They're rubber. I've never damaged them and I've done it multiple times with a screwdriver