club.liberty.asn.au

Can anyone tell me what this car was VIN jf1bl9kh37d030150.
I purchased some parts and was supplied the VIN.
Cheers

Liberty sedan, GT spec.

07MY model (10th digit is the year model).

The 11th digit should be a 'G' not a 'd'.

No definitely a D(unless its a typo) and I need more info

What parts did you get? And from what country?

Here's a vin guide, American so slightly different but should sort you out?
http://www.cars101.com/subaru/vin.html

JF1 = Passenger Car, FHI made (except for KA OUTBACK model)
B = LIBERTY/LEGACY model
L = Body Type SEDAN
9 = Displacement 2.5 Litre AWD
K = Steering RHD
H = ????? Engine & Transmission Code
3 = Full Time AWD Single Range
7 = Model Year 7: 2007MY
G = FHI Gunma Plant
030150 Sequential Number

zch91 wrote:What parts did you get? And from what country?

Here's a vin guide, American so slightly different but should sort you out?
http://www.cars101.com/subaru/vin.html

Thanks Zach. I purchased some brembo brakes with all the control arms, backing plates, hand brake assy and disks etc.
I am just making sure its off a Lib before I pull the rears apart and get stuck needing conversion pieces. Purchased in Sydney. HNY

BillyCorgi wrote:JF1 = Passenger Car, FHI made (except for KA OUTBACK model)
B = LIBERTY/LEGACY model
L = Body Type SEDAN
9 = Displacement 2.5 Litre AWD
K = Steering RHD
H = ????? Engine & Transmission Code
3 = Full Time AWD Single Range
7 = Model Year 7: 2007MY
G = FHI Gunma Plant
030150 Sequential Number

Thanks Pete. I have got a little bit more info by using my VIN but your info is sufficient.HNY

Try here.....
http://www.vincarhistory.com.au/vin/Subaru

JF1BL9KH37G030150 equals
Subaru Liberty Gen 4 GT Tuned By STI Sedan 4dr Man 6sp AWD 2.5T
Subaru Liberty Gen 4 GT Spec.B Sedan 4dr Man 6sp AWD 2.5T

BillyCorgi wrote:Try here.....
http://www.vincarhistory.com.au/vin/Subaru

JF1BL9KH37G030150 equals
Subaru Liberty Gen 4 GT Tuned By STI Sedan 4dr Man 6sp AWD 2.5T
Subaru Liberty Gen 4 GT Spec.B Sedan 4dr Man 6sp AWD 2.5T

Yes Peter its the top one and Ive got its complete,no adapters needed, brembo setup