Page 1 of 1

Bypass Audio Safety Settings

PostPosted: Thu Aug 07, 2014 6:09 pm
by daveG
Can someone please help me...

I just want to be able to use all the features, change artist/album/genre etc when driving through the HU.

When my USB device is connected i can only do it when stopped.
Such a pain.

Any information would be helpful.

Thanks

Re: Bypass Audio Safety Settings

PostPosted: Mon Aug 11, 2014 4:27 pm
by TomTom
daveG wrote:Can someone please help me...

I just want to be able to use all the features, change artist/album/genre etc when driving through the HU.

When my USB device is connected i can only do it when stopped.
Such a pain.

Any information would be helpful.

Thanks


Are we talking about the stock head unit or a after market one? Sounds like what they do with DVD's, to bypass you just attach that wire to ground and if thinks it's always stationary.

Re: Bypass Audio Safety Settings

PostPosted: Mon Aug 11, 2014 4:41 pm
by daveG
That was the fix. Thanks so much for the tip anyway.
I fixed it last weekend. Quite easy once I found out how.

Re: Bypass Audio Safety Settings

PostPosted: Sun Oct 12, 2014 7:22 am
by Alpejohn
Hi :)

Is this possible to do on a 07 Legacy also? (i would think so) I cant use the navigation and all that..
Very anoying :angry2:

Where did you find the wire to put to ground? :)


Regards
Fredrik

Re: Bypass Audio Safety Settings

PostPosted: Sun Oct 12, 2014 9:10 am
by daveG
I'm not sure if you could do it with the my07. I couldn't see why not.
I just got a bit of 1mm cable and put a lug on it. You just have to connect it on anything that is earthed behind the head unit.

Good luck

Re: Bypass Audio Safety Settings

PostPosted: Sun Oct 12, 2014 8:34 pm
by Alpejohn
Hm.. I think i need to investigate! :D