BP rear 12v socket
Posted:
Tue May 06, 2014 2:51 pmby Shiv
Hi there,
My BP Outback doesn't have a rear 12v outlet in the cargo area like my old BH Outback did, and I do require one.
I noticed there is clearly a cutout where one would go...
I called Subaru and they said they did not do them for this model so maybe it was a JDM only thing? Anyone know it if is possible to retrofit one in or where I could buy a kit from?
Re: BP rear 12v socket
Posted:
Tue May 06, 2014 5:42 pmby Anson
In my MY06 outback I just cut out that and put a 12V socket like this -
Originally I ran wires from the front cigarette lighter, but when I pulled the rear
panel off, there were already wires behind...
http://i00.i.aliimg.com/img/pb/677/046/875/875046677_512.jpg
Re: BP rear 12v socket
Posted:
Tue May 06, 2014 5:48 pmby Shiv
Oh ok, so there are already wires behind?
Well that makes things simpler. So yeah all I have to do is get a generic socket and it should all be good
Thanks!
Re: BP rear 12v socket
Posted:
Tue May 06, 2014 5:58 pmby Anson
Yeah, I can't find the photos I took.
But basically there was just a blank wiring harness taped up in the corner...
Could be neat and find a wiring harness to plug straight in, but i just chopped the wires.
For memory it was the same type of wiring harness that the front 12V + Cigarette lighter have,
so if you can find a Socket that has 90 degree pins, should plug straight in...
Re: BP rear 12v socket
Posted:
Tue May 06, 2014 6:15 pmby Anson
Yeah man, just had a quick look at my new Liberty...
Has the same thing - Pics attached
It's is MY06 preface lift though, hopefully postface lift is the same..
As said in last post, if you can find a generic socket with 90 degree outputs,
your laughing...
Like this -
http://www.ebay.com.au/itm/12V-120W-Waterproof-Car-Motorcycle-Cigarette-Lighter-Power-Socket-Outlet-Plug-/181377304728?pt=AU_Motorcycle_Parts_Accessories&hash=item2a3aee0898&_uhb=1
Re: BP rear 12v socket
Posted:
Tue May 06, 2014 6:38 pmby Shiv
Champion! That's just what I wanted to see!
